Export limit exceeded: 354344 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (354344 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46195 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: validate dacloffset before building DACL pointers parse_sec_desc(), build_sec_desc(), and the chown path in id_mode_to_cifs_acl() all add the server-supplied dacloffset to pntsd before proving a DACL header fits inside the returned security descriptor. On 32-bit builds a malicious server can return dacloffset near U32_MAX, wrap the derived DACL pointer below end_of_acl, and then slip past the later pointer-based bounds checks. build_sec_desc() and id_mode_to_cifs_acl() can then dereference DACL fields from the wrapped pointer in the chmod/chown rewrite paths. Validate dacloffset numerically before building any DACL pointer and reuse the same helper at the three DACL entry points. | ||||
| CVE-2026-46190 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: debugfs: fix out-of-bounds read in spi_nor_params_show() Sashiko noticed an out-of-bounds read [1]. In spi_nor_params_show(), the snor_f_names array is passed to spi_nor_print_flags() using sizeof(snor_f_names). Since snor_f_names is an array of pointers, sizeof() returns the total number of bytes occupied by the pointers (element_count * sizeof(void *)) rather than the element count itself. On 64-bit systems, this makes the passed length 8x larger than intended. Inside spi_nor_print_flags(), the 'names_len' argument is used to bounds-check the 'names' array access. An out-of-bounds read occurs if a flag bit is set that exceeds the array's actual element count but is within the inflated byte-size count. Correct this by using ARRAY_SIZE() to pass the actual number of string pointers in the array. | ||||
| CVE-2026-46185 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: fix out-of-bounds read in symlink_data() Since smb2_check_message() returns success without length validation for the symlink error response, in symlink_data() it is possible for iov->iov_len to be smaller than sizeof(struct smb2_err_rsp). If the buffer only contains the base SMB2 header (64 bytes), accessing err->ErrorContextCount (at offset 66) or err->ByteCount later in symlink_data() will cause an out-of-bounds read. | ||||
| CVE-2026-46181 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx4: Fix mis-use of RCU in mlx4_srq_event() Sashiko points out the radix_tree itself is RCU safe, but nothing ever frees the mlx4_srq struct with RCU, and it isn't even accessed within the RCU critical section. It also will crash if an event is delivered before the srq object is finished initializing. Use the spinlock since it isn't easy to make RCU work, use refcount_inc_not_zero() to protect against partially initialized objects, and order the refcount_set() to be after the srq is fully initialized. | ||||
| CVE-2026-46178 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx4: Fix resource leak on error in mlx4_ib_create_srq() Sashiko points out that mlx4_srq_alloc() was not undone during error unwind, add the missing call to mlx4_srq_free(). | ||||
| CVE-2026-46177 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ipmi: Add limits to event and receive message requests The driver would just fetch events and receive messages until the BMC said it was done. To avoid issues with BMCs that never say they are done, add a limit of 10 fetches at a time. In addition, an si interface has an attn state it can return from the hardware which is supposed to cause a flag fetch to see if the driver needs to fetch events or message or a few other things. If the attn bit gets stuck, it's a similar problem. So allow messages in between flag fetches so the driver itself doesn't get stuck. This is a more general fix than the previous fix for the specific bad BMC, but should fix the more general issue of a BMC that won't stop saying it has data. This has been there from the beginning of the driver. It's not a bug per-se, but it is accounting for bugs in BMCs. | ||||
| CVE-2026-46176 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix error path fall-through in mlx5_ib_dev_res_srq_init() mlx5_ib_dev_res_srq_init() allocates two SRQs, s0 and s1. When ib_create_srq() fails for s1, the error branch destroys s0 but falls through and unconditionally assigns the freed s0 and the ERR_PTR s1 to devr->s0 and devr->s1. This leads to several problems: the lock-free fast path checks "if (devr->s1) return 0;" and treats the ERR_PTR as already initialised; users in mlx5_ib_create_qp() dereference the freed SRQ or ERR_PTR via to_msrq(devr->s0)->msrq.srqn; and mlx5_ib_dev_res_cleanup() dereferences the ERR_PTR and double-frees s0 on teardown. Fix by adding the same `goto unlock` in the s1 failure path. | ||||
| CVE-2026-46175 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix fsck inconsistency caused by FGGC of node block During FGGC node block migration, fsck may incorrectly treat the migrated node block as fsync-written data. The reproduction scenario: root@vm:/mnt/f2fs# seq 1 2048 | xargs -n 1 ./test_sync // write inline inode and sync root@vm:/mnt/f2fs# rm -f 1 root@vm:/mnt/f2fs# sync root@vm:/mnt/f2fs# f2fs_io gc_range // move data block in sync mode and not write CP SPO, "fsck --dry-run" find inode has already checkpointed but still with DENT_BIT_SHIFT set The root cause is that GC does not clear the dentry mark and fsync mark during node block migration, leading fsck to misinterpret them as user-issued fsync writes. In BGGC mode, node block migration is handled by f2fs_sync_node_pages(), which guarantees the dentry and fsync marks are cleared before writing. This patch move the set/clear of the fsync|dentry marks into __write_node_folio to make the logic clearer, and ensures the fsync|dentry mark is cleared in FGGC. | ||||
| CVE-2026-46174 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: x86/CPU/AMD: Prevent improper isolation of shared resources in Zen2's op cache Make sure resources are not improperly shared in the op cache and cause instruction corruption this way. | ||||
| CVE-2026-46173 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: exit: prevent preemption of oopsing TASK_DEAD task When an already-exiting task oopses, make_task_dead() currently calls do_task_dead() with preemption enabled. That is forbidden: do_task_dead() calls __schedule(), which has a comment saying "WARNING: must be called with preemption disabled!". If an oopsing task is preempted in do_task_dead(), between becoming TASK_DEAD and entering the scheduler explicitly, bad things happen: finish_task_switch() assumes that once the scheduler has switched away from a TASK_DEAD task, the task can never run again and its stack is no longer needed; but that assumption apparently doesn't hold if the dead task was preempted (the SM_PREEMPT case). This means that the scheduler ends up repeatedly dropping references on the dead task's stack, which can lead to use-after-free or double-free of the entire task stack; in other words, two tasks can end up running on the same stack, resulting in various kinds of memory corruption. (This does not just affect "recursively oopsing" tasks; it is enough to oops once during task exit, for example in a file_operations::release handler) | ||||
| CVE-2026-46166 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: use safe list iteration in radar detect work The call to ieee80211_dfs_cac_cancel can cause the iterated chanctx to be freed and removed from the list. Guard against this to avoid a slab-use-after-free error. | ||||
| CVE-2026-46164 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix double free in create_space_info_sub_group() error path When kobject_init_and_add() fails, the call chain is: create_space_info_sub_group() -> btrfs_sysfs_add_space_info_type() -> kobject_init_and_add() -> failure -> kobject_put(&sub_group->kobj) -> space_info_release() -> kfree(sub_group) Then control returns to create_space_info_sub_group(), where: btrfs_sysfs_add_space_info_type() returns error -> kfree(sub_group) Thus, sub_group is freed twice. Keep parent->sub_group[index] = NULL for the failure path, but after btrfs_sysfs_add_space_info_type() has called kobject_put(), let the kobject release callback handle the cleanup. | ||||
| CVE-2026-46157 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: oss: Fix data race at accessing runtime.oss.trigger Currently the runtime.oss.trigger field may be accessed concurrently without protection, which may lead to the data race. And, in this case, it may lead to more severe problem because it's a bit field; as writing the data, it may overwrite other bit fields as well, which confuses the operation completely, as spotted by fuzzing. Fix it by covering runtime.oss.trigger bit fled also with the existing params_lock mutex in both snd_pcm_oss_get_trigger() and snd_pcm_oss_poll(). | ||||
| CVE-2026-46155 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb/client: fix out-of-bounds read in smb2_compound_op() If a server sends a truncated response but a large OutputBufferLength, and terminates the EA list early, check_wsl_eas() returns success without validating that the entire OutputBufferLength fits within iov_len. Then smb2_compound_op() does: memcpy(idata->wsl.eas, data[0], size[0]); Where size[0] is OutputBufferLength. If iov_len is smaller than size[0], memcpy can read beyond the end of the rsp_iov allocation and leak adjacent kernel heap memory. | ||||
| CVE-2026-46154 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Read scx_root under scx_cgroup_ops_rwsem in cgroup setters scx_group_set_{weight,idle,bandwidth}() cache scx_root before acquiring scx_cgroup_ops_rwsem, so the pointer can be stale by the time the op runs. If the loaded scheduler is disabled and freed (via RCU work) and another is enabled between the naked load and the rwsem acquire, the reader sees scx_cgroup_enabled=true (the new scheduler's) but dereferences the freed one - UAF on SCX_HAS_OP(sch, ...) / SCX_CALL_OP(sch, ...). scx_cgroup_enabled is toggled only under scx_cgroup_ops_rwsem write (scx_cgroup_{init,exit}), so reading scx_root inside the rwsem read section correlates @sch with the enabled snapshot. | ||||
| CVE-2026-46152 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: drop stray 'static' from fast-RX rx_result ieee80211_invoke_fast_rx() is documented as safe for parallel RX, but its per-invocation rx_result is declared static. Concurrent callers then share one instance and can overwrite each other's result between ieee80211_rx_mesh_data() and the switch on res. That can make a packet that was queued or consumed by ieee80211_rx_mesh_data() fall through into ieee80211_rx_8023(), or make a packet that should continue return as queued. Make res an automatic variable so each invocation keeps its own result. | ||||
| CVE-2026-46150 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: fanotify: fix false positive on permission events fsnotify_get_mark_safe() may return false for a mark on an unrelated group, which results in bypassing the permission check. Fix by skipping over detached marks that are not in the current group. | ||||
| CVE-2026-46149 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: configfs: Bound snprintf() return in tg_pt_gp_members_show() target_tg_pt_gp_members_show() formats LUN paths with snprintf() into a 256-byte stack buffer, then will memcpy() cur_len bytes from that buffer. snprintf() returns the length the output would have had, which can exceed the buffer size when the fabric WWN is long because iSCSI IQN names can be up to 223 bytes. The check at the memcpy() site only guards the destination page write, not the source read, so memcpy() will read past the stack buffer and copy adjacent stack contents to the sysfs reader, which when CONFIG_FORTIFY_SOURCE is enabled, fortify_panic() will be triggered. Commit 27e06650a5ea ("scsi: target: target_core_configfs: Add length check to avoid buffer overflow") added the same bound to the target_lu_gp_members_show() but the tg_pt_gp variant was missed so resolve that here. | ||||
| CVE-2026-46145 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mana: Validate rx_hash_key_len Sashiko points out that rx_hash_key_len comes from a uAPI structure and is blindly passed to memcpy, allowing the userspace to trash kernel memory. Bounds check it so the memcpy cannot overflow. | ||||
| CVE-2026-46138 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: Fix OOB read and infinite loop in hci_le_create_big_complete_evt hci_le_create_big_complete_evt() iterates over BT_BOUND connections for a BIG handle using a while loop, accessing ev->bis_handle[i++] on each iteration. However, there is no check that i stays within ev->num_bis before the array access. When a controller sends a LE_Create_BIG_Complete event with fewer bis_handle entries than there are BT_BOUND connections for that BIG, or with num_bis=0, the loop reads beyond the valid bis_handle[] flex array into adjacent heap memory. Since the out-of-bounds values typically exceed HCI_CONN_HANDLE_MAX (0x0EFF), hci_conn_set_handle() rejects them and the connection remains in BT_BOUND state. The same connection is then found again by hci_conn_hash_lookup_big_state(), creating an infinite loop with hci_dev_lock held. Fix this by terminating the BIG if in case not all BIS could be setup properly. | ||||