| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Vulnerability in the Oracle Hospitality OPERA 5 Property Services product of Oracle Hospitality Applications (component: Opera). Supported versions that are affected are 5.6.19.24, 5.6.22, 5.6.25.19, 5.6.27.6 and 5.6.28. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Hospitality OPERA 5 Property Services. Successful attacks of this vulnerability can result in takeover of Oracle Hospitality OPERA 5 Property Services. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in the Oracle Financials Common Modules product of Oracle E-Business Suite (component: Common Components). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Financials Common Modules. While the vulnerability is in Oracle Financials Common Modules, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Financials Common Modules accessible data as well as unauthorized update, insert or delete access to some of Oracle Financials Common Modules accessible data. CVSS 3.1 Base Score 8.5 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:L/A:N). |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rw: free potentially allocated iovec on cache put failure
If a read/write request goes through io_req_rw_cleanup() and has an
allocated iovec attached and fails to put to the rw_cache, then it may
end up with an unaccounted iovec pointer. Have io_rw_recycle() return
whether it recycled the request or not, and use that to gauge whether to
free a potential iovec or not. |
| IBM Aspera HSTS for CP4I 1.5.1 through 1.5.19 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix IS_CHECKPOINTED flag inconsistency issue caused by concurrent atomic commit and checkpoint writes
During SPO tests, when mounting F2FS, an -EINVAL error was returned from
f2fs_recover_inode_page. The issue occurred under the following scenario
Thread A Thread B
f2fs_ioc_commit_atomic_write
- f2fs_do_sync_file // atomic = true
- f2fs_fsync_node_pages
: last_folio = inode folio
: schedule before folio_lock(last_folio) f2fs_write_checkpoint
- block_operations// writeback last_folio
- schedule before f2fs_flush_nat_entries
: set_fsync_mark(last_folio, 1)
: set_dentry_mark(last_folio, 1)
: folio_mark_dirty(last_folio)
- __write_node_folio(last_folio)
: f2fs_down_read(&sbi->node_write)//block
- f2fs_flush_nat_entries
: {struct nat_entry}->flag |= BIT(IS_CHECKPOINTED)
- unblock_operations
: f2fs_up_write(&sbi->node_write)
f2fs_write_checkpoint//return
: f2fs_do_write_node_page()
f2fs_ioc_commit_atomic_write//return
SPO
Thread A calls f2fs_need_dentry_mark(sbi, ino), and the last_folio has
already been written once. However, the {struct nat_entry}->flag did not
have the IS_CHECKPOINTED set, causing set_dentry_mark(last_folio, 1) and
write last_folio again after Thread B finishes f2fs_write_checkpoint.
After SPO and reboot, it was detected that {struct node_info}->blk_addr
was not NULL_ADDR because Thread B successfully write the checkpoint.
This issue only occurs in atomic write scenarios. For regular file
fsync operations, the folio must be dirty. If
block_operations->f2fs_sync_node_pages successfully submit the folio
write, this path will not be executed. Otherwise, the
f2fs_write_checkpoint will need to wait for the folio write submission
to complete, as sbi->nr_pages[F2FS_DIRTY_NODES] > 0. Therefore, the
situation where f2fs_need_dentry_mark checks that the {struct
nat_entry}->flag /wo the IS_CHECKPOINTED flag, but the folio write has
already been submitted, will not occur.
Therefore, for atomic file fsync, sbi->node_write should be acquired
through __write_node_folio to ensure that the IS_CHECKPOINTED flag
correctly indicates that the checkpoint write has been completed. |
| Insufficient validation of untrusted input in OptimizationGuide in Google Chrome prior to 148.0.7778.216 allowed a remote attacker who had compromised the renderer process to perform UI spoofing via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on node footer in {read,write}_end_io
-----------[ cut here ]------------
kernel BUG at fs/f2fs/data.c:358!
Call Trace:
<IRQ>
blk_update_request+0x5eb/0xe70 block/blk-mq.c:987
blk_mq_end_request+0x3e/0x70 block/blk-mq.c:1149
blk_complete_reqs block/blk-mq.c:1224 [inline]
blk_done_softirq+0x107/0x160 block/blk-mq.c:1229
handle_softirqs+0x283/0x870 kernel/softirq.c:579
__do_softirq kernel/softirq.c:613 [inline]
invoke_softirq kernel/softirq.c:453 [inline]
__irq_exit_rcu+0xca/0x1f0 kernel/softirq.c:680
irq_exit_rcu+0x9/0x30 kernel/softirq.c:696
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1050 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1050
</IRQ>
In f2fs_write_end_io(), it detects there is inconsistency in between
node page index (nid) and footer.nid of node page.
If footer of node page is corrupted in fuzzed image, then we load corrupted
node page w/ async method, e.g. f2fs_ra_node_pages() or f2fs_ra_node_page(),
in where we won't do sanity check on node footer, once node page becomes
dirty, we will encounter this bug after node page writeback. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix unprivileged local user can do privileged policy management
An unprivileged local user can load, replace, and remove profiles by
opening the apparmorfs interfaces, via a confused deputy attack, by
passing the opened fd to a privileged process, and getting the
privileged process to write to the interface.
This does require a privileged target that can be manipulated to do
the write for the unprivileged process, but once such access is
achieved full policy management is possible and all the possible
implications that implies: removing confinement, DoS of system or
target applications by denying all execution, by-passing the
unprivileged user namespace restriction, to exploiting kernel bugs for
a local privilege escalation.
The policy management interface can not have its permissions simply
changed from 0666 to 0600 because non-root processes need to be able
to load policy to different policy namespaces.
Instead ensure the task writing the interface has privileges that
are a subset of the task that opened the interface. This is already
done via policy for confined processes, but unconfined can delegate
access to the opened fd, by-passing the usual policy check. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "drm/amd: Check if ASPM is enabled from PCIe subsystem"
This reverts commit 7294863a6f01248d72b61d38478978d638641bee.
This commit was erroneously applied again after commit 0ab5d711ec74
("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")
removed it, leading to very hard to debug crashes, when used with a system with two
AMD GPUs of which only one supports ASPM.
(cherry picked from commit 97a9689300eb2b393ba5efc17c8e5db835917080) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix type confusion in l2cap_ecred_reconf_rsp()
l2cap_ecred_reconf_rsp() casts the incoming data to struct
l2cap_ecred_conn_rsp (the ECRED *connection* response, 8 bytes with
result at offset 6) instead of struct l2cap_ecred_reconf_rsp (2 bytes
with result at offset 0).
This causes two problems:
- The sizeof(*rsp) length check requires 8 bytes instead of the
correct 2, so valid L2CAP_ECRED_RECONF_RSP packets are rejected
with -EPROTO.
- rsp->result reads from offset 6 instead of offset 0, returning
wrong data when the packet is large enough to pass the check.
Fix by using the correct type. Also pass the already byte-swapped
result variable to BT_DBG instead of the raw __le16 field. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't irele after failing to iget in xfs_attri_recover_work
xlog_recovery_iget* never set @ip to a valid pointer if they return
an error, so this irele will walk off a dangling pointer. Fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Fix not releasing workqueue on .release()
The workqueue associated with an DSA/IAA device is not released when
the object is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: always drain queued discard work in ext4_mb_release()
While reviewing recent ext4 patch[1], Sashiko raised the following
concern[2]:
> If the filesystem is initially mounted with the discard option,
> deleting files will populate sbi->s_discard_list and queue
> s_discard_work. If it is then remounted with nodiscard, the
> EXT4_MOUNT_DISCARD flag is cleared, but the pending s_discard_work is
> neither cancelled nor flushed.
[1] https://lore.kernel.org/r/20260319094545.19291-1-qiang.zhang@linux.dev/
[2] https://sashiko.dev/#/patchset/20260319094545.19291-1-qiang.zhang%40linux.dev
The concern was valid, but it had nothing to do with the patch[1].
One of the problems with Sashiko in its current (early) form is that
it will detect pre-existing issues and report it as a problem with the
patch that it is reviewing.
In practice, it would be hard to hit deliberately (unless you are a
malicious syzkaller fuzzer), since it would involve mounting the file
system with -o discard, and then deleting a large number of files,
remounting the file system with -o nodiscard, and then immediately
unmounting the file system before the queued discard work has a change
to drain on its own.
Fix it because it's a real bug, and to avoid Sashiko from raising this
concern when analyzing future patches to mballoc.c. |
| Insufficient validation of untrusted input in Passwords in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: platform_get_irq_byname() returns an int
platform_get_irq_byname() will return a negative value if an error
happens, so it should be checked and not just passed directly into
devm_request_threaded_irq() hoping all will be ok. |
| Insufficient validation of untrusted input in USB in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to execute arbitrary code via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/sifive-plic: Fix frozen interrupt due to affinity setting
PLIC ignores interrupt completion message for disabled interrupt, explained
by the specification:
The PLIC signals it has completed executing an interrupt handler by
writing the interrupt ID it received from the claim to the
claim/complete register. The PLIC does not check whether the completion
ID is the same as the last claim ID for that target. If the completion
ID does not match an interrupt source that is currently enabled for
the target, the completion is silently ignored.
This caused problems in the past, because an interrupt can be disabled
while still being handled and plic_irq_eoi() had no effect. That was fixed
by checking if the interrupt is disabled, and if so enable it, before
sending the completion message. That check is done with irqd_irq_disabled().
However, that is not sufficient because the enable bit for the handling
hart can be zero despite irqd_irq_disabled(d) being false. This can happen
when affinity setting is changed while a hart is still handling the
interrupt.
This problem is easily reproducible by dumping a large file to uart (which
generates lots of interrupts) and at the same time keep changing the uart
interrupt's affinity setting. The uart port becomes frozen almost
instantaneously.
Fix this by checking PLIC's enable bit instead of irqd_irq_disabled(). |
| Insufficient state checks lead to a vector that allows to bypass 2FA checks. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/mthca: Add missed mthca_unmap_user_db() for mthca_create_srq()
Fix a user triggerable leak on the system call failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: pegasus: validate USB endpoints
The pegasus driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints. |
