| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix IS_CHECKPOINTED flag inconsistency issue caused by concurrent atomic commit and checkpoint writes
During SPO tests, when mounting F2FS, an -EINVAL error was returned from
f2fs_recover_inode_page. The issue occurred under the following scenario
Thread A Thread B
f2fs_ioc_commit_atomic_write
- f2fs_do_sync_file // atomic = true
- f2fs_fsync_node_pages
: last_folio = inode folio
: schedule before folio_lock(last_folio) f2fs_write_checkpoint
- block_operations// writeback last_folio
- schedule before f2fs_flush_nat_entries
: set_fsync_mark(last_folio, 1)
: set_dentry_mark(last_folio, 1)
: folio_mark_dirty(last_folio)
- __write_node_folio(last_folio)
: f2fs_down_read(&sbi->node_write)//block
- f2fs_flush_nat_entries
: {struct nat_entry}->flag |= BIT(IS_CHECKPOINTED)
- unblock_operations
: f2fs_up_write(&sbi->node_write)
f2fs_write_checkpoint//return
: f2fs_do_write_node_page()
f2fs_ioc_commit_atomic_write//return
SPO
Thread A calls f2fs_need_dentry_mark(sbi, ino), and the last_folio has
already been written once. However, the {struct nat_entry}->flag did not
have the IS_CHECKPOINTED set, causing set_dentry_mark(last_folio, 1) and
write last_folio again after Thread B finishes f2fs_write_checkpoint.
After SPO and reboot, it was detected that {struct node_info}->blk_addr
was not NULL_ADDR because Thread B successfully write the checkpoint.
This issue only occurs in atomic write scenarios. For regular file
fsync operations, the folio must be dirty. If
block_operations->f2fs_sync_node_pages successfully submit the folio
write, this path will not be executed. Otherwise, the
f2fs_write_checkpoint will need to wait for the folio write submission
to complete, as sbi->nr_pages[F2FS_DIRTY_NODES] > 0. Therefore, the
situation where f2fs_need_dentry_mark checks that the {struct
nat_entry}->flag /wo the IS_CHECKPOINTED flag, but the folio write has
already been submitted, will not occur.
Therefore, for atomic file fsync, sbi->node_write should be acquired
through __write_node_folio to ensure that the IS_CHECKPOINTED flag
correctly indicates that the checkpoint write has been completed. |
| Formie is a Craft CMS plugin for creating forms. Prior to 2.2.20 and 3.1.24, unauthenticated users could submit crafted values into Hidden fields (with Default value → Custom) that were evaluated as Twig during submission handling, which could lead to serious compromise of the Craft site (depending on template/sandbox behavior). This vulnerability is fixed in 2.2.20 and 3.1.24. |
| Formie is a Craft CMS plugin for creating forms. Prior to 2.2.21 and 3.1.26, unauthenticated users could modify existing submissions by posting a known or guessed submission ID to formie/submissions/save-submission. This vulnerability is fixed in 2.2.21 and 3.1.26. |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). In 0.19.0 and earlier, the protectedProcedure middleware only verifies the user is authenticated - it does NOT enforce organization scoping. Each endpoint must individually verify the resource's org matches the session's activeOrganizationId. This affects the following endpoints: allByType, killProcess, and removeDeployment in deployment.ts; delete in rollbacks.ts; create, one, update, remove, manualBackupPostgres, MySql, Mariadb, Mongo, Compose, WebServer, and listBackupFiles in backup.ts; list, one, delete, update, runManually, and restoreVolumeBackupWithLogs in volume-backups.ts; getNodes, removeWorker, addWorker, and addManager in cluster.ts; and create in mount.ts. |
| SillyTavern is a locally installed user interface that allows users to interact with text generation large language models, image generation engines, and text-to-speech voice models. Prior to 1.18.0, SillyTavern relies on cookie-session for authentication, storing all session data (user handle, permissions) in a signed cookie. The endpoints POST /api/users/change-password and POST /api/users/recover-step2 only update the password hash in the database but do not expire current sessions. Because the session is stateless and stored entirely in the client cookie, there is no server-side mechanism to revoke a token once issued. This vulnerability is fixed in 1.18.0. |
| In JetBrains TeamCity before 2026.1 open redirect in the SAML plugin was possible |
| In JetBrains IntelliJ IDEA before 2026.1 xXE in the UI Designer form parser was possible |
| In JetBrains YouTrack before 2026.1.13570 improper access control allowed enumeration of restricted issues and articles on Planning Canvas |
| The affected KMW CCTV Security Cameras are vulnerable to a critical unauthenticated password reset. This flaw allows an attacker to remotely reset the administrator password to a known value without authentication, granting full access to the camera feeds and settings. |
| URL redirection in Samsung Account prior to version 15.5.01.1 allows local attackers to potentially get access token. |
| Devise is an authentication solution for Rails based on Warden. In versions 5.0.3 and below, when the Timeoutable module is enabled in Devise, the FailureApp#redirect_url method returns request.referrer — the HTTP Referer header, which is attacker-controllable — without validation for any non-GET request that results in a session timeout. An attacker who hosts a page with an auto-submitting cross-origin form can cause a victim with an expired Devise session to be redirected to an arbitrary external URL. This contrasts with the GET timeout path (which uses server-side attempted_path) and Devise's own store_location_for mechanism (which strips external hosts via extract_path_from_location), both of which are protected; only the non-GET timeout redirect path is unprotected. Expired-session users can be silently redirected from the trusted app domain to attacker-controlled URLs, enabling phishing and malware delivery while bypassing browser warnings. Note: Rails' built-in open-redirect protection does not mitigate this issue. Devise::FailureApp is an ActionController::Metal app with its own isolated copy of the relevant redirect configuration, so config.action_controller.action_on_open_redirect = :raise (and the older raise_on_open_redirects setting) do not reach it. This issue has been fixed in version 5.0.4. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250: Fix TX deadlock when using DMA
`dmaengine_terminate_async` does not guarantee that the
`__dma_tx_complete` callback will run. The callback is currently the
only place where `dma->tx_running` gets cleared. If the transaction is
canceled and the callback never runs, then `dma->tx_running` will never
get cleared and we will never schedule new TX DMA transactions again.
This change makes it so we clear `dma->tx_running` after we terminate
the DMA transaction. This is "safe" because `serial8250_tx_dma_flush`
is holding the UART port lock. The first thing the callback does is also
grab the UART port lock, so access to `dma->tx_running` is serialized. |
| A vulnerability was determined in postcss up to 7.1.1. Affected is the function toString of the file src/selectors/container.js of the component AST Serialization. Executing a manipulation can lead to uncontrolled recursion. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor explains, that according to his definition "DoS on server-side on user-generated CSS is low risk for us (since most users compile own CSS with PostCSS)." |
| Inappropriate implementation in Input in Google Chrome on Android prior to 148.0.7778.216 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: High) |
| Plesk contains an XPath injection vulnerability in the APS Application Catalog search functionality, where user-supplied input is interpolated into XPath queries without proper sanitization. This allows an authenticated, low-privileged user to execute arbitrary operating system commands on the server, resulting in local privilege escalation. |
| Hono is a Web application framework that provides support for any JavaScript runtime. Prior to 4.12.21, app.mount() strips the mount prefix from the incoming request path using the raw URL pathname, while route matching is performed against the percent-decoded path. This inconsistency causes the prefix to be stripped at the wrong position when the path contains percent-encoded multi-byte characters, resulting in the mounted sub-application receiving an incorrect path. This vulnerability is fixed in 4.12.21. |
| AnythingLLM is an application that turns pieces of content into context that any LLM can use as references during chatting. Prior to 1.13.0, an approved mobile device token created in single-user mode can survive single-user -> multi-user migration even when the device record has userId = null. In multi-user mode, that stale token is still accepted by the mobile authentication middleware. Because no user is attached to the request, downstream mobile handlers fall back to unscoped data-access branches and return workspaces and workspace content without per-user filtering. This permits a pre-migration mobile token to enumerate a workspace assigned only to another user and retrieve victim-owned thread metadata and chat content in multi-user mode. This vulnerability is fixed in 1.13.0. |
| Improper handling of physical conditions in the bike-shutdown control of the Indian Motorcycle Scout Bobber + Tech 2025 model year allows a physical attacker with access to the Wireless Control Module (WCM) wiring harness to bypass the anti-theft shutdown. The WCM signals shutdown to a peer ECU via a falling-edge voltage transition on a dedicated wire pair. The receiving ECU does not distinguish between an active shutdown pulse and an open-circuit / disconnected condition; interrupting the relevant wires leaves the motorcycle fully operable even though the WCM never validated the rider's PIN. Specific connector details have been withheld pending vendor remediation. |
| Expected behavior violation in the in-vehicle network of the Indian Motorcycle Scout Bobber + Tech 2025 model year allows an adjacent-network attacker to bypass the motorcycle's anti-theft shutdown by forcing the Wireless Control Module (WCM) into the CAN bus-off state. Using a well-known CAN error-frame injection technique against a periodic WCM transmission, the attacker drives the WCM CAN controller's transmit error counter past the bus-off threshold, after which the WCM stops transmitting all messages, including the shutdown command. Peer ECUs do not interpret WCM silence as a security event and continue normal operation, allowing the motorcycle to be operated despite the immobilizer never having been unlocked. Specific protocol details have been withheld pending vendor remediation. |
| pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.9.1, src/evdev.c silently ignores EACCES errors when opening /dev/input/event* nodes, causing pusb_has_virtual_input_device() to return 0 (no virtual devices found) even when every open() call failed due to insufficient permissions. The caller in src/local.c cannot distinguish a clean absence of virtual devices from a permission-denied scan, and acts on the false negative by continuing authentication without denying. This vulnerability is fixed in 0.9.1. |
