| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.9.1, src/evdev.c silently ignores EACCES errors when opening /dev/input/event* nodes, causing pusb_has_virtual_input_device() to return 0 (no virtual devices found) even when every open() call failed due to insufficient permissions. The caller in src/local.c cannot distinguish a clean absence of virtual devices from a permission-denied scan, and acts on the false negative by continuing authentication without denying. This vulnerability is fixed in 0.9.1. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/gem: fix error handling in msm_ioctl_gem_info_get_metadata()
msm_ioctl_gem_info_get_metadata() always returns 0 regardless of
errors. When copy_to_user() fails or the user buffer is too small,
the error code stored in ret is ignored because the function
unconditionally returns 0. This causes userspace to believe the
ioctl succeeded when it did not.
Additionally, kmemdup() can return NULL on allocation failure, but
the return value is not checked. This leads to a NULL pointer
dereference in the subsequent copy_to_user() call.
Add the missing NULL check for kmemdup() and return ret instead of 0.
Note that the SET counterpart (msm_ioctl_gem_info_set_metadata)
correctly returns ret.
Patchwork: https://patchwork.freedesktop.org/patch/714478/ |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: Check event message buffer response for bad data
The event message buffer response data size got checked later when
processing, but check it right after the response comes back. It
appears some BMCs may return an empty message instead of an error
when fetching events.
There are apparently some new BMCs that make this error, so we need to
compensate. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/gcs: Fix error handling in arch_set_shadow_stack_status()
alloc_gcs() returns an error-encoded pointer on failure, which comes
from do_mmap(), not NULL.
The current NULL check fails to detect errors, which could lead to using
an invalid GCS address.
Use IS_ERR_VALUE() to properly detect errors, consistent with the
check in gcs_alloc_thread_stack(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix invalid leaf access in btrfs_quota_enable() if ref key not found
If btrfs_search_slot_for_read() returns 1, it means we did not find any
key greater than or equals to the key we asked for, meaning we have
reached the end of the tree and therefore the path is not valid. If
this happens we need to break out of the loop and stop, instead of
continuing and accessing an invalid path. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Inject #UD for INVLPGA if EFER.SVME=0
INVLPGA should cause a #UD when EFER.SVME is not set. Add a check to
properly inject #UD when EFER.SVME=0.
[sean: tag for stable@] |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix error handling in rxgk_extract_token()
Fix a missing bit of error handling in rxgk_extract_token(): in the event
that rxgk_decrypt_skb() returns -ENOMEM, it should just return that rather
than continuing on (for anything else, it generates an abort). |
| A flaw was found in rsync. It could allow a server to enumerate the contents of an arbitrary file from the client's machine. This issue occurs when files are being copied from a client to a server. During this process, the rsync server will send checksums of local data to the client to compare with in order to determine what data needs to be sent to the server. By sending specially constructed checksum values for arbitrary files, an attacker may be able to reconstruct the data of those files byte-by-byte based on the responses from the client. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: samsung-dsim: Fix memory leak in error path
In samsung_dsim_host_attach(), drm_bridge_add() is called to add the
bridge. However, if samsung_dsim_register_te_irq() or
pdata->host_ops->attach() fails afterwards, the function returns
without removing the bridge, causing a memory leak.
Fix this by adding proper error handling with goto labels to ensure
drm_bridge_remove() is called in all error paths. Also ensure that
samsung_dsim_unregister_te_irq() is called if the attach operation
fails after the TE IRQ has been registered.
samsung_dsim_unregister_te_irq() function is moved without changes
to be before samsung_dsim_host_attach() to avoid forward declaration. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: acp-mach-common: Add missing error check for clock acquisition
The acp_card_rt5682_init() and acp_card_rt5682s_init() functions did not
check the return values of clk_get(). This could lead to a kernel crash
when the invalid pointers are later dereferenced by clock core
functions.
Fix this by:
1. Changing clk_get() to the device-managed devm_clk_get().
2. Adding IS_ERR() checks immediately after each clock acquisition. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: unset conn->binding on failed binding request
When a multichannel SMB2_SESSION_SETUP request with
SMB2_SESSION_REQ_FLAG_BINDING fails ksmbd sets conn->binding = true
but never clears it on the error path. This leaves the connection in
a binding state where all subsequent ksmbd_session_lookup_all() calls
fall back to the global sessions table. This fix it by clearing
conn->binding = false in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx: xdma: Fix regmap init error handling
devm_regmap_init_mmio returns an ERR_PTR() upon error, not NULL.
Fix the error check and also fix the error message. Use the error code
from ERR_PTR() instead of the wrong value in ret. |
| Gitsign is a keyless Sigstore to signing tool for Git commits with your a GitHub / OIDC identity. From 0.4.0 to before 0.15.0, CertVerifier.Verify() in pkg/git/verifier.go unconditionally dereferences certs[0] after sd.GetCertificates() without checking the slice length. A CMS/PKCS7 signed message with an empty certificate set is a structurally valid DER payload; GetCertificates() returns an empty slice with no error, causing an immediate index-out-of-range panic. On the gitsign --verify code path (the GPG-compatible mode invoked by git verify-commit), the panic is silently recovered by internal/io/streams.go's Wrap() function, which returns nil instead of an error. main.go then exits with code 0, causing exit-code-only verification callers to interpret the failed verification as success. This vulnerability is fixed in 0.15.0. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: mpu3050-core: fix pm_runtime error handling
The return value of pm_runtime_get_sync() is not checked, allowing
the driver to access hardware that may fail to resume. The device
usage count is also unconditionally incremented. Use
pm_runtime_resume_and_get() which propagates errors and avoids
incrementing the usage count on failure.
In preenable, add pm_runtime_put_autosuspend() on set_8khz_samplerate()
failure since postdisable does not run when preenable fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: acp3x-rt5682-max9836: Add missing error check for clock acquisition
The acp3x_5682_init() function did not check the return value of
clk_get(), which could lead to dereferencing error pointers in
rt5682_clk_enable().
Fix this by:
1. Changing clk_get() to the device-managed devm_clk_get().
2. Adding proper IS_ERR() checks for both clock acquisitions. |
| In the Linux kernel, the following vulnerability has been resolved:
liveupdate: luo_file: remember retrieve() status
LUO keeps track of successful retrieve attempts on a LUO file. It does so
to avoid multiple retrievals of the same file. Multiple retrievals cause
problems because once the file is retrieved, the serialized data
structures are likely freed and the file is likely in a very different
state from what the code expects.
The retrieve boolean in struct luo_file keeps track of this, and is passed
to the finish callback so it knows what work was already done and what it
has left to do.
All this works well when retrieve succeeds. When it fails,
luo_retrieve_file() returns the error immediately, without ever storing
anywhere that a retrieve was attempted or what its error code was. This
results in an errored LIVEUPDATE_SESSION_RETRIEVE_FD ioctl to userspace,
but nothing prevents it from trying this again.
The retry is problematic for much of the same reasons listed above. The
file is likely in a very different state than what the retrieve logic
normally expects, and it might even have freed some serialization data
structures. Attempting to access them or free them again is going to
break things.
For example, if memfd managed to restore 8 of its 10 folios, but fails on
the 9th, a subsequent retrieve attempt will try to call
kho_restore_folio() on the first folio again, and that will fail with a
warning since it is an invalid operation.
Apart from the retry, finish() also breaks. Since on failure the
retrieved bool in luo_file is never touched, the finish() call on session
close will tell the file handler that retrieve was never attempted, and it
will try to access or free the data structures that might not exist, much
in the same way as the retry attempt.
There is no sane way of attempting the retrieve again. Remember the error
retrieve returned and directly return it on a retry. Also pass this
status code to finish() so it can make the right decision on the work it
needs to do.
This is done by changing the bool to an integer. A value of 0 means
retrieve was never attempted, a positive value means it succeeded, and a
negative value means it failed and the error code is the value. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: handle attr_set_size() errors when truncating files
If attr_set_size() fails while truncating down, the error is silently
ignored and the inode may be left in an inconsistent state. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Prevent interrupt storm on host controller error (HCE)
The xHCI controller reports a Host Controller Error (HCE) in UAS Storage
Device plug/unplug scenarios on Android devices. HCE is checked in
xhci_irq() function and causes an interrupt storm (since the interrupt
isn’t cleared), leading to severe system-level faults.
When the xHC controller reports HCE in the interrupt handler, the driver
only logs a warning and assumes xHC activity will stop as stated in xHCI
specification. An interrupt storm does however continue on some hosts
even after HCE, and only ceases after manually disabling xHC interrupt
and stopping the controller by calling xhci_halt().
Add xhci_halt() to xhci_irq() function where STS_HCE status is checked,
mirroring the existing error handling pattern used for STS_FATAL errors.
This only fixes the interrupt storm. Proper HCE recovery requires resetting
and re-initializing the xHC. |
| A vulnerability was found in OpenSSH when the VerifyHostKeyDNS option is enabled. A machine-in-the-middle attack can be performed by a malicious machine impersonating a legit server. This issue occurs due to how OpenSSH mishandles error codes in specific conditions when verifying the host key. For an attack to be considered successful, the attacker needs to manage to exhaust the client's memory resource first, turning the attack complexity high. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: q6asm: drop DSP responses for closed data streams
'Commit a354f030dbce ("ASoC: qcom: q6asm: handle the responses
after closing")' attempted to ignore DSP responses arriving
after a stream had been closed.
However, those responses were still handled, causing lockups.
Fix this by unconditionally dropping all DSP responses associated with
closed data streams. |
