| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Use after free in Skia in Google Chrome prior to 148.0.7778.216 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Use after free in ANGLE in Google Chrome prior to 148.0.7778.216 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix race in devmap on PREEMPT_RT
On PREEMPT_RT kernels, the per-CPU xdp_dev_bulk_queue (bq) can be
accessed concurrently by multiple preemptible tasks on the same CPU.
The original code assumes bq_enqueue() and __dev_flush() run atomically
with respect to each other on the same CPU, relying on
local_bh_disable() to prevent preemption. However, on PREEMPT_RT,
local_bh_disable() only calls migrate_disable() (when
PREEMPT_RT_NEEDS_BH_LOCK is not set) and does not disable
preemption, which allows CFS scheduling to preempt a task during
bq_xmit_all(), enabling another task on the same CPU to enter
bq_enqueue() and operate on the same per-CPU bq concurrently.
This leads to several races:
1. Double-free / use-after-free on bq->q[]: bq_xmit_all() snapshots
cnt = bq->count, then iterates bq->q[0..cnt-1] to transmit frames.
If preempted after the snapshot, a second task can call bq_enqueue()
-> bq_xmit_all() on the same bq, transmitting (and freeing) the
same frames. When the first task resumes, it operates on stale
pointers in bq->q[], causing use-after-free.
2. bq->count and bq->q[] corruption: concurrent bq_enqueue() modifying
bq->count and bq->q[] while bq_xmit_all() is reading them.
3. dev_rx/xdp_prog teardown race: __dev_flush() clears bq->dev_rx and
bq->xdp_prog after bq_xmit_all(). If preempted between
bq_xmit_all() return and bq->dev_rx = NULL, a preempting
bq_enqueue() sees dev_rx still set (non-NULL), skips adding bq to
the flush_list, and enqueues a frame. When __dev_flush() resumes,
it clears dev_rx and removes bq from the flush_list, orphaning the
newly enqueued frame.
4. __list_del_clearprev() on flush_node: similar to the cpumap race,
both tasks can call __list_del_clearprev() on the same flush_node,
the second dereferences the prev pointer already set to NULL.
The race between task A (__dev_flush -> bq_xmit_all) and task B
(bq_enqueue -> bq_xmit_all) on the same CPU:
Task A (xdp_do_flush) Task B (ndo_xdp_xmit redirect)
---------------------- --------------------------------
__dev_flush(flush_list)
bq_xmit_all(bq)
cnt = bq->count /* e.g. 16 */
/* start iterating bq->q[] */
<-- CFS preempts Task A -->
bq_enqueue(dev, xdpf)
bq->count == DEV_MAP_BULK_SIZE
bq_xmit_all(bq, 0)
cnt = bq->count /* same 16! */
ndo_xdp_xmit(bq->q[])
/* frames freed by driver */
bq->count = 0
<-- Task A resumes -->
ndo_xdp_xmit(bq->q[])
/* use-after-free: frames already freed! */
Fix this by adding a local_lock_t to xdp_dev_bulk_queue and acquiring
it in bq_enqueue() and __dev_flush(). These paths already run under
local_bh_disable(), so use local_lock_nested_bh() which on non-RT is
a pure annotation with no overhead, and on PREEMPT_RT provides a
per-CPU sleeping lock that serializes access to the bq. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: mpc52xx: fix use-after-free on unbind
The state machine work is scheduled by the interrupt handler and
therefore needs to be cancelled after disabling interrupts to avoid a
potential use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: appletb-kbd: fix UAF in inactivity-timer cleanup path
Commit 38224c472a03 ("HID: appletb-kbd: fix slab use-after-free bug in
appletb_kbd_probe") added timer_delete_sync(&kbd->inactivity_timer) to
both the probe close_hw error path and appletb_kbd_remove(), but the
way it was wired in left the inactivity timer reachable during driver
tear-down via two distinct windows.
Window A -- put_device() before timer_delete_sync():
put_device(&kbd->backlight_dev->dev);
timer_delete_sync(&kbd->inactivity_timer);
The inactivity_timer softirq reads kbd->backlight_dev and calls
backlight_device_set_brightness() -> mutex_lock(&ops_lock). If a
concurrent hid_appletb_bl unbind drops the last devm reference
between these two calls, the backlight_device is freed and the
mutex_lock() touches freed memory.
Window B -- backlight cleanup before hid_hw_stop():
if (kbd->backlight_dev) {
timer_delete_sync(...);
put_device(...);
}
hid_hw_close(hdev);
hid_hw_stop(hdev);
Even after Window A is closed, hid_hw_close()/hid_hw_stop() still run
afterwards, so a late ".event" callback from the HID core (USB URB
completion on real Apple hardware) can arrive after
timer_delete_sync() drained the softirq but before put_device() drops
the reference. That callback reaches reset_inactivity_timer(), which
calls mod_timer() and re-arms the timer. The freshly re-armed timer
can then fire on the about-to-be-freed backlight_device.
Both windows produce the same KASAN slab-use-after-free:
BUG: KASAN: slab-use-after-free in __mutex_lock+0x1aab/0x21c0
Read of size 8 at addr ffff88803ee9a108 by task swapper/0/0
Call Trace:
<IRQ>
__mutex_lock
backlight_device_set_brightness
appletb_inactivity_timer
call_timer_fn
run_timer_softirq
handle_softirqs
Allocated by task N:
devm_backlight_device_register
appletb_bl_probe
Freed by task M:
(concurrent hid_appletb_bl unbind path)
Close both windows at once by reworking the tear-down in
appletb_kbd_remove() and in the probe close_hw error path so that
1) hid_hw_close()/hid_hw_stop() run before the backlight cleanup,
guaranteeing no further .event callback can fire and re-arm the
timer, and
2) inside the "if (kbd->backlight_dev)" block, timer_delete_sync()
runs before put_device(), so the softirq is drained before the
final reference is dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Fix potential use-after-free issue when stopping watchdog task
Watchdog task might end between send_sig() and kthread_stop() calls, what
results in the use-after-free issue. Fix this by increasing watchdog task
reference count before calling send_sig() and dropping it by switching to
kthread_stop_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: bla: prevent use-after-free when deleting claims
When batadv_bla_del_backbone_claims() removes all claims for a backbone, it
does this by dropping the link entry in the hash list. This list entry
itself was one of the references which need to be dropped at the same time
via batadv_claim_put().
But the batadv_claim_put() must not be done before the last access to the
claim object in this function. Otherwise the claim might be freed already
by the batadv_claim_release() function before the list entry was dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: ab8500: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Commit 1c1f13a006ed ("power: supply: ab8500: Move to componentized
binding") introduced this issue during a refactorization. Fix this racy
use-after-free by making sure the IRQ is requested _after_ the
registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: pm8916_lbc: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: pf1550: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "hwmon: (ibmpex) fix use-after-free in high/low store"
This reverts commit 6946c726c3f4c36f0f049e6f97e88c510b15f65d.
Jean Delvare points out that the patch does not completely
fix the reported problem, that it in fact introduces a
(new) race condition, and that it may actually not be needed in
the first place.
Various AI reviews agree. Specific and relevant AI feedback:
"
This reordering sets the driver data to NULL before removing the sensor
attributes in the loop below.
ibmpex_show_sensor() retrieves this driver data via dev_get_drvdata() but
does not check if it is NULL before dereferencing it to access
data->sensors[].
If a userspace process reads a sensor file (like temp1_input) while this
delete function is running, could it race with the dev_set_drvdata(...,
NULL) call here and crash in ibmpex_show_sensor()?
Would it be safer to keep the original order where device_remove_file() is
called before clearing the driver data? device_remove_file() should wait
for any active sysfs callbacks to complete, which might already prevent the
use-after-free this patch intends to fix.
"
Revert the offending patch. If it can be shown that the originally reported
alleged race condition does indeed exist, it can always be re-introduced
with a complete fix. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: pm8916_bms_vm: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: cpcap-battery: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
hwrng: core - use RCU and work_struct to fix race condition
Currently, hwrng_fill is not cleared until the hwrng_fillfn() thread
exits. Since hwrng_unregister() reads hwrng_fill outside the rng_mutex
lock, a concurrent hwrng_unregister() may call kthread_stop() again on
the same task.
Additionally, if hwrng_unregister() is called immediately after
hwrng_register(), the stopped thread may have never been executed. Thus,
hwrng_fill remains dirty even after hwrng_unregister() returns. In this
case, subsequent calls to hwrng_register() will fail to start new
threads, and hwrng_unregister() will call kthread_stop() on the same
freed task. In both cases, a use-after-free occurs:
refcount_t: addition on 0; use-after-free.
WARNING: ... at lib/refcount.c:25 refcount_warn_saturate+0xec/0x1c0
Call Trace:
kthread_stop+0x181/0x360
hwrng_unregister+0x288/0x380
virtrng_remove+0xe3/0x200
This patch fixes the race by protecting the global hwrng_fill pointer
inside the rng_mutex lock, so that hwrng_fillfn() thread is stopped only
once, and calls to kthread_run() and kthread_stop() are serialized
with the lock held.
To avoid deadlock in hwrng_fillfn() while being stopped with the lock
held, we convert current_rng to RCU, so that get_current_rng() can read
current_rng without holding the lock. To remove the lock from put_rng(),
we also delay the actual cleanup into a work_struct.
Since get_current_rng() no longer returns ERR_PTR values, the IS_ERR()
checks are removed from its callers.
With hwrng_fill protected by the rng_mutex lock, hwrng_fillfn() can no
longer clear hwrng_fill itself. Therefore, if hwrng_fillfn() returns
directly after current_rng is dropped, kthread_stop() would be called on
a freed task_struct later. To fix this, hwrng_fillfn() calls schedule()
now to keep the task alive until being stopped. The kthread_stop() call
is also moved from hwrng_unregister() to drop_current_rng(), ensuring
kthread_stop() is called on all possible paths where current_rng becomes
NULL, so that the thread would not wait forever. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: sbs-battery: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. Keep the old behavior of
just printing a warning in case of any failures during the IRQ request
and finishing the probe successfully. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: caif: fix use-after-free in caif_serial ldisc_close()
There is a use-after-free bug in caif_serial where handle_tx() may
access ser->tty after the tty has been freed.
The race condition occurs between ldisc_close() and packet transmission:
CPU 0 (close) CPU 1 (xmit)
------------- ------------
ldisc_close()
tty_kref_put(ser->tty)
[tty may be freed here]
<-- race window -->
caif_xmit()
handle_tx()
tty = ser->tty // dangling ptr
tty->ops->write() // UAF!
schedule_work()
ser_release()
unregister_netdevice()
The root cause is that tty_kref_put() is called in ldisc_close() while
the network device is still active and can receive packets.
Since ser and tty have a 1:1 binding relationship with consistent
lifecycles (ser is allocated in ldisc_open and freed in ser_release
via unregister_netdevice, and each ser binds exactly one tty), we can
safely defer the tty reference release to ser_release() where the
network device is unregistered.
Fix this by moving tty_kref_put() from ldisc_close() to ser_release(),
after unregister_netdevice(). This ensures the tty reference is held
as long as the network device exists, preventing the UAF.
Note: We save ser->tty before unregister_netdevice() because ser is
embedded in netdev's private data and will be freed along with netdev
(needs_free_netdev = true).
How to reproduce: Add mdelay(500) at the beginning of ldisc_close()
to widen the race window, then run the reproducer program [1].
Note: There is a separate deadloop issue in handle_tx() when using
PORT_UNKNOWN serial ports (e.g., /dev/ttyS3 in QEMU without proper
serial backend). This deadloop exists even without this patch,
and is likely caused by inconsistency between uart_write_room() and
uart_write() in serial core. It has been addressed in a separate
patch [2].
KASAN report:
==================================================================
BUG: KASAN: slab-use-after-free in handle_tx+0x5d1/0x620
Read of size 1 at addr ffff8881131e1490 by task caif_uaf_trigge/9929
Call Trace:
<TASK>
dump_stack_lvl+0x10e/0x1f0
print_report+0xd0/0x630
kasan_report+0xe4/0x120
handle_tx+0x5d1/0x620
dev_hard_start_xmit+0x9d/0x6c0
__dev_queue_xmit+0x6e2/0x4410
packet_xmit+0x243/0x360
packet_sendmsg+0x26cf/0x5500
__sys_sendto+0x4a3/0x520
__x64_sys_sendto+0xe0/0x1c0
do_syscall_64+0xc9/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f615df2c0d7
Allocated by task 9930:
Freed by task 64:
Last potentially related work creation:
The buggy address belongs to the object at ffff8881131e1000
which belongs to the cache kmalloc-cg-2k of size 2048
The buggy address is located 1168 bytes inside of
freed 2048-byte region [ffff8881131e1000, ffff8881131e1800)
The buggy address belongs to the physical page:
page_owner tracks the page as allocated
page last free pid 9778 tgid 9778 stack trace:
Memory state around the buggy address:
ffff8881131e1380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881131e1400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8881131e1480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881131e1500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881131e1580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
[1]: https://gist.github.com/mrpre/f683f244544f7b11e7fa87df9e6c2eeb
[2]: https://lore.kernel.org/linux-serial/20260204074327.226165-1-jiayuan.chen@linux.dev/T/#u |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: act8945a: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/slab: return NULL early from kmalloc_nolock() in NMI on UP
On UP kernels (!CONFIG_SMP), spin_trylock() is a no-op that
unconditionally succeeds even when the lock is already held. As a
result, kmalloc_nolock() called from NMI context can re-enter the slab
allocator and acquire n->list_lock that the interrupted context is
already holding, corrupting slab state.
With CONFIG_DEBUG_SPINLOCK on UP, the following BUG is triggered with
the slub_kunit test module:
BUG: spinlock trylock failure on UP on CPU#0, kunit_try_catch/243
[...]
Call Trace:
<NMI>
dump_stack_lvl+0x3f/0x60
do_raw_spin_trylock+0x41/0x50
_raw_spin_trylock+0x24/0x50
get_from_partial_node+0x120/0x4d0
___slab_alloc+0x8a/0x4c0
kmalloc_nolock_noprof+0x164/0x310
[...]
</NMI>
Fix this by returning NULL early when invoked from NMI on a UP kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
media: amphion: Fix race between m2m job_abort and device_run
Fix kernel panic caused by race condition where v4l2_m2m_ctx_release()
frees m2m_ctx while v4l2_m2m_try_run() is about to call device_run
with the same context.
Race sequence:
v4l2_m2m_try_run(): v4l2_m2m_ctx_release():
lock/unlock v4l2_m2m_cancel_job()
job_abort()
v4l2_m2m_job_finish()
kfree(m2m_ctx) <- frees ctx
device_run() <- use-after-free crash at 0x538
Crash trace:
Unable to handle kernel read from unreadable memory at virtual address
0000000000000538
v4l2_m2m_try_run+0x78/0x138
v4l2_m2m_device_run_work+0x14/0x20
The amphion vpu driver does not rely on the m2m framework's device_run
callback to perform encode/decode operations.
Fix the race by preventing m2m framework job scheduling entirely:
- Add job_ready callback returning 0 (no jobs ready for m2m framework)
- Remove job_abort callback to avoid the race condition |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: aloop: Fix peer runtime UAF during format-change stop
loopback_check_format() may stop the capture side when playback starts
with parameters that no longer match a running capture stream. Commit
826af7fa62e3 ("ALSA: aloop: Fix racy access at PCM trigger") moved
the peer lookup under cable->lock, but the actual snd_pcm_stop() still
runs after dropping that lock.
A concurrent close can clear the capture entry from cable->streams[] and
detach or free its runtime while the playback trigger path still holds a
stale peer substream pointer.
Keep a per-cable count of in-flight peer stops before dropping
cable->lock, and make free_cable() wait for those stops before
detaching the runtime. This preserves the existing behavior while
making the peer runtime lifetime explicit. |
