| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A race condition in the shared Extreme Platform
ONE IAM Gateway API-key authentication path could, under specific
high-concurrency traffic conditions, intermittently allow requests
authenticated with an Extreme Platform ONE /IAM-issued API key to receive
response data for another tenant. The issue was observed through ExtremeCloud
IQ/XIQ API endpoints and validated against both XIQ/XAPI and Extreme Platform ONE
/Common Services API paths. XIQ-native tokens and standard OAuth/Bearer JWT
authentication were not affected. |
| Race in WebRTC in Google Chrome on Windows prior to 148.0.7778.216 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix IS_CHECKPOINTED flag inconsistency issue caused by concurrent atomic commit and checkpoint writes
During SPO tests, when mounting F2FS, an -EINVAL error was returned from
f2fs_recover_inode_page. The issue occurred under the following scenario
Thread A Thread B
f2fs_ioc_commit_atomic_write
- f2fs_do_sync_file // atomic = true
- f2fs_fsync_node_pages
: last_folio = inode folio
: schedule before folio_lock(last_folio) f2fs_write_checkpoint
- block_operations// writeback last_folio
- schedule before f2fs_flush_nat_entries
: set_fsync_mark(last_folio, 1)
: set_dentry_mark(last_folio, 1)
: folio_mark_dirty(last_folio)
- __write_node_folio(last_folio)
: f2fs_down_read(&sbi->node_write)//block
- f2fs_flush_nat_entries
: {struct nat_entry}->flag |= BIT(IS_CHECKPOINTED)
- unblock_operations
: f2fs_up_write(&sbi->node_write)
f2fs_write_checkpoint//return
: f2fs_do_write_node_page()
f2fs_ioc_commit_atomic_write//return
SPO
Thread A calls f2fs_need_dentry_mark(sbi, ino), and the last_folio has
already been written once. However, the {struct nat_entry}->flag did not
have the IS_CHECKPOINTED set, causing set_dentry_mark(last_folio, 1) and
write last_folio again after Thread B finishes f2fs_write_checkpoint.
After SPO and reboot, it was detected that {struct node_info}->blk_addr
was not NULL_ADDR because Thread B successfully write the checkpoint.
This issue only occurs in atomic write scenarios. For regular file
fsync operations, the folio must be dirty. If
block_operations->f2fs_sync_node_pages successfully submit the folio
write, this path will not be executed. Otherwise, the
f2fs_write_checkpoint will need to wait for the folio write submission
to complete, as sbi->nr_pages[F2FS_DIRTY_NODES] > 0. Therefore, the
situation where f2fs_need_dentry_mark checks that the {struct
nat_entry}->flag /wo the IS_CHECKPOINTED flag, but the folio write has
already been submitted, will not occur.
Therefore, for atomic file fsync, sbi->node_write should be acquired
through __write_node_folio to ensure that the IS_CHECKPOINTED flag
correctly indicates that the checkpoint write has been completed. |
| Shopper is a Headless e-commerce Admin Panel. Prior to 2.8.0, CreateOrderFromCartAction::execute previously created the Order row before checking and incrementing the discount's total_use counter. Under concurrent checkout pressure (Black Friday, flash sale, viral coupon), the global usage_limit was silently exceeded: orders were committed with the discount fully applied to price_amount while the counter blocked at usage_limit. The merchant had no signal that an over-redemption had occurred. This vulnerability is fixed in 2.8.0. |
| Race in WebAudio in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| An issue was discovered in do_madvise in mm/madvise.c in the Linux kernel before 5.6.8. There is a race condition between coredump operations and the IORING_OP_MADVISE implementation, aka CID-bc0c4d1e176e. |
| Dalfox is a powerful open-source XSS scanner and utility focused on automation. Prior to 2.13.0, ParameterAnalysis in pkg/scanning/parameterAnalysis.go runs two sequential worker stages that both write to the same results channel. The channel is correctly closed after the first stage completes (close(results) at line 438), but the second stage — which processes POST-body parameters (dp) — is then launched with the same already-closed channel as its output. When a scanned parameter is reflected, processParams executes results <- paramResult on the closed channel, triggering a Go runtime panic that crashes the entire dalfox process. In server mode, the crash is remotely triggerable by any unauthenticated caller who can reach the REST API, because the default configuration has no API key and the second stage activates whenever options.Data != "" (i.e., the attacker supplies the data field) and the target reflects at least one parameter. This vulnerability is fixed in 2.13.0. |
| pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.9.1, src/log.c contains a process-wide static pointer that is written on every PAM invocation with the address of a stack-local variable. This violates the PAM re-entrancy requirement and creates a data race when the PAM stack is invoked concurrently from multiple threads. This vulnerability is fixed in 0.9.1. |
| pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.9.0, pam_usb is a PAM module loaded into the host process (sudo, login, GDM, GNOME Shell). Display managers such as GDM run multiple concurrent authentication threads. Three functions used by the deny_remote feature called the non-reentrant strtok(), which stores state in a single global pointer. If two authentications race, one thread's strtok() call can overwrite the other's in-progress tokenisation pointer, causing incorrect parsing of the tmux session data or the /proc environ scan that backs the remote-session detection logic. Additionally, pusb_tmux_get_client_tty() passed the raw pointer returned by getenv(TMUX) directly to strtok(). getenv() returns a pointer into the live process environment block; strtok() inserts NUL bytes into that block, permanently corrupting the TMUX variable for subsequent code running in the same process. In long-lived display managers this affects all future authentications in that process. The combined effect can cause deny_remote=true to return an incorrect decision for a remote session, or an incorrect decision for a local session, depending on thread interleaving. This vulnerability is fixed in 0.9.0. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix race in devmap on PREEMPT_RT
On PREEMPT_RT kernels, the per-CPU xdp_dev_bulk_queue (bq) can be
accessed concurrently by multiple preemptible tasks on the same CPU.
The original code assumes bq_enqueue() and __dev_flush() run atomically
with respect to each other on the same CPU, relying on
local_bh_disable() to prevent preemption. However, on PREEMPT_RT,
local_bh_disable() only calls migrate_disable() (when
PREEMPT_RT_NEEDS_BH_LOCK is not set) and does not disable
preemption, which allows CFS scheduling to preempt a task during
bq_xmit_all(), enabling another task on the same CPU to enter
bq_enqueue() and operate on the same per-CPU bq concurrently.
This leads to several races:
1. Double-free / use-after-free on bq->q[]: bq_xmit_all() snapshots
cnt = bq->count, then iterates bq->q[0..cnt-1] to transmit frames.
If preempted after the snapshot, a second task can call bq_enqueue()
-> bq_xmit_all() on the same bq, transmitting (and freeing) the
same frames. When the first task resumes, it operates on stale
pointers in bq->q[], causing use-after-free.
2. bq->count and bq->q[] corruption: concurrent bq_enqueue() modifying
bq->count and bq->q[] while bq_xmit_all() is reading them.
3. dev_rx/xdp_prog teardown race: __dev_flush() clears bq->dev_rx and
bq->xdp_prog after bq_xmit_all(). If preempted between
bq_xmit_all() return and bq->dev_rx = NULL, a preempting
bq_enqueue() sees dev_rx still set (non-NULL), skips adding bq to
the flush_list, and enqueues a frame. When __dev_flush() resumes,
it clears dev_rx and removes bq from the flush_list, orphaning the
newly enqueued frame.
4. __list_del_clearprev() on flush_node: similar to the cpumap race,
both tasks can call __list_del_clearprev() on the same flush_node,
the second dereferences the prev pointer already set to NULL.
The race between task A (__dev_flush -> bq_xmit_all) and task B
(bq_enqueue -> bq_xmit_all) on the same CPU:
Task A (xdp_do_flush) Task B (ndo_xdp_xmit redirect)
---------------------- --------------------------------
__dev_flush(flush_list)
bq_xmit_all(bq)
cnt = bq->count /* e.g. 16 */
/* start iterating bq->q[] */
<-- CFS preempts Task A -->
bq_enqueue(dev, xdpf)
bq->count == DEV_MAP_BULK_SIZE
bq_xmit_all(bq, 0)
cnt = bq->count /* same 16! */
ndo_xdp_xmit(bq->q[])
/* frames freed by driver */
bq->count = 0
<-- Task A resumes -->
ndo_xdp_xmit(bq->q[])
/* use-after-free: frames already freed! */
Fix this by adding a local_lock_t to xdp_dev_bulk_queue and acquiring
it in bq_enqueue() and __dev_flush(). These paths already run under
local_bh_disable(), so use local_lock_nested_bh() which on non-RT is
a pure annotation with no overhead, and on PREEMPT_RT provides a
per-CPU sleeping lock that serializes access to the bq. |
| free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, free5GC's BSF PUT /nbsf-management/v1/subscriptions/{subId} handler has an unsynchronized write on the global Subscriptions map. The handler first reads the map under RLock() via BSFContext.GetSubscription(subId), but if the subscription does not exist, ReplaceIndividualSubcription() writes back to the same map directly without taking the mutex (bsfContext.BsfSelf.Subscriptions[subId] = subscription). Under concurrent authenticated PUT load, one goroutine can read while another writes the map, which causes the Go runtime to abort the process with fatal error: concurrent map read and map write (Go runtime panics that come from concurrent map access bypass recover() and terminate the process). The BSF container exits with code 2 -- the entire BSF SBI surface goes down until restart. This vulnerability is fixed in 4.2.2. |
| ASP.NET and Visual Studio Security Feature Bypass Vulnerability |
| In the Linux kernel, the following vulnerability has been resolved:
net: annotate data-races around sk->sk_{data_ready,write_space}
skmsg (and probably other layers) are changing these pointers
while other cpus might read them concurrently.
Add corresponding READ_ONCE()/WRITE_ONCE() annotations
for UDP, TCP and AF_UNIX. |
| Lumiverse is a full-featured AI chat application. Prior to 0.9.7, consumeNonce() only checks that the module-level variable is set and unexpired. It does not validate any value from the incoming HTTP request or bind the nonce to the admin's session. If the admin's auth.api.signUpEmail() call fails before the before hook fires (e.g. BetterAuth rejects a duplicate email at the validation layer), the nonce is set but never consumed. Any POST /api/auth/sign-up/email request that arrives during the remaining window registers successfully regardless of who sent it. An attacker who can observe or predict when the admin is creating users (must be a dupplicate user) can race the 10-second window to register an unauthorized account. This vulnerability is fixed in 0.9.7. |
| In the Linux kernel, the following vulnerability has been resolved:
greybus: gb-beagleplay: fix sleep in atomic context in hdlc_tx_frames()
hdlc_append() calls usleep_range() to wait for circular buffer space,
but it is called with tx_producer_lock (a spinlock) held via
hdlc_tx_frames() -> hdlc_append_tx_frame()/hdlc_append_tx_u8()/etc.
Sleeping while holding a spinlock is illegal and can trigger
"BUG: scheduling while atomic".
Fix this by moving the buffer-space wait out of hdlc_append() and into
hdlc_tx_frames(), before the spinlock is acquired. The new flow:
1. Pre-calculate the worst-case encoded frame length.
2. Wait (with sleep) outside the lock until enough space is available,
kicking the TX consumer work to drain the buffer.
3. Acquire the spinlock, re-verify space, and write the entire frame
atomically.
This ensures that sleeping only happens without any lock held, and
that frames are either fully enqueued or not written at all.
This bug is found by CodeQL static analysis tool (interprocedural
sleep-in-atomic query) and my code review. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: fix deferred split queue races during migration
migrate_folio_move() records the deferred split queue state from src and
replays it on dst. Replaying it after remove_migration_ptes(src, dst, 0)
makes dst visible before it is requeued, so a concurrent rmap-removal path
can mark dst partially mapped and trip the WARN in deferred_split_folio().
Move the requeue before remove_migration_ptes() so dst is back on the
deferred split queue before it becomes visible again.
Because migration still holds dst locked at that point, teach
deferred_split_scan() to requeue a folio when folio_trylock() fails.
Otherwise a fully mapped underused folio can be dequeued by the shrinker
and silently lost from split_queue.
[ziy@nvidia.com: move the comment] |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (powerz) Avoid cacheline sharing for DMA buffer
Depending on the architecture the transfer buffer may share a cacheline
with the following mutex. As the buffer may be used for DMA, that is
problematic.
Use the high-level DMA helpers to make sure that cacheline sharing can
not happen.
Also drop the comment, as the helpers are documentation enough.
https://sashiko.dev/#/message/20260408175814.934BFC19421%40smtp.kernel.org |
| A race condition was addressed with additional validation. This issue is fixed in macOS Sequoia 15.7, macOS Tahoe 26. An app may be able to gain root privileges. |
| NVIDIA Display Driver for Linux contains a vulnerability in a kernel module, where a user could cause a race condition by reordering compiler or processor memory instructions. A successful exploit of this vulnerability might lead to denial of service. |
| IBM WebSphere Application Server - Liberty 22.0.0.11 through 26.0.0.5 IBM WebSphere Application Server Liberty could allow a remote attacker to bypass security under limited conditions by exploiting a specific timing window. |
