| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in libssh versions built with OpenSSL versions older than 3.0, specifically in the ssh_kdf() function responsible for key derivation. Due to inconsistent interpretation of return values where OpenSSL uses 0 to indicate failure and libssh uses 0 for success—the function may mistakenly return a success status even when key derivation fails. This results in uninitialized cryptographic key buffers being used in subsequent communication, potentially compromising SSH sessions' confidentiality, integrity, and availability. |
| An unbounded resend loop vulnerability exists in the BIND 9 resolver state machine during bad-server handling, enabling a remote unauthenticated attacker to cause severe resource exhaustion by sending queries that trigger specific retry conditions.
This issue affects BIND 9 versions 9.18.36 through 9.18.48, 9.20.8 through 9.20.22, 9.21.7 through 9.21.21, 9.18.36-S1 through 9.18.48-S1, and 9.20.9-S1 through 9.20.22-S1. |
| Vvveb before 1.0.8.3 contains an unrestricted file upload vulnerability in the plugin upload endpoint that allows super_admin users to execute arbitrary PHP code by uploading a malicious plugin ZIP file. Attackers can craft a ZIP containing a plugin.php with a valid Slug header and a public/index.php file with arbitrary PHP code, which executes as the web server user once accessed via subsequent unauthenticated HTTP requests to the plugin's public path. |
| Typebot is a chatbot builder tool. In versions 3.15.2 and prior, the getResultLogs API endpoint authorizes the caller against the provided typebotId but fetches logs solely by resultId without verifying that the result belongs to the authorized typebot, leading to IDOR. An authenticated attacker can supply their own typebotId alongside any victim's resultId to read execution logs from other workspaces, leaking sensitive data including HTTP response bodies, AI model outputs, and webhook payloads. Every other result-scoped endpoint in the same router properly validates that the resultId belongs to the authorized typebotId. This confirms the missing check is an oversight, not a design choice. This issue has been fixed in version 3.15.2. |
| In the Linux kernel, the following vulnerability has been resolved:
net: add xmit recursion limit to tunnel xmit functions
Tunnel xmit functions (iptunnel_xmit, ip6tunnel_xmit) lack their own
recursion limit. When a bond device in broadcast mode has GRE tap
interfaces as slaves, and those GRE tunnels route back through the
bond, multicast/broadcast traffic triggers infinite recursion between
bond_xmit_broadcast() and ip_tunnel_xmit()/ip6_tnl_xmit(), causing
kernel stack overflow.
The existing XMIT_RECURSION_LIMIT (8) in the no-qdisc path is not
sufficient because tunnel recursion involves route lookups and full IP
output, consuming much more stack per level. Use a lower limit of 4
(IP_TUNNEL_RECURSION_LIMIT) to prevent overflow.
Add recursion detection using dev_xmit_recursion helpers directly in
iptunnel_xmit() and ip6tunnel_xmit() to cover all IPv4/IPv6 tunnel
paths including UDP encapsulated tunnels (VXLAN, Geneve, etc.).
Move dev_xmit_recursion helpers from net/core/dev.h to public header
include/linux/netdevice.h so they can be used by tunnel code.
BUG: KASAN: stack-out-of-bounds in blake2s.constprop.0+0xe7/0x160
Write of size 32 at addr ffff88810033fed0 by task kworker/0:1/11
Workqueue: mld mld_ifc_work
Call Trace:
<TASK>
__build_flow_key.constprop.0 (net/ipv4/route.c:515)
ip_rt_update_pmtu (net/ipv4/route.c:1073)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:84)
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86)
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
mld_sendpack
mld_ifc_work
process_one_work
worker_thread
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
drm/exynos: hdmi: report safe 640x480 mode as a fallback when no EDID found
When reading EDID fails and driver reports no modes available, the DRM
core adds an artificial 1024x786 mode to the connector. Unfortunately
some variants of the Exynos HDMI (like the one in Exynos4 SoCs) are not
able to drive such mode, so report a safe 640x480 mode instead of nothing
in case of the EDID reading failure.
This fixes the following issue observed on Trats2 board since commit
13d5b040363c ("drm/exynos: do not return negative values from .get_modes()"):
[drm] Exynos DRM: using 11c00000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 11c00000.fimd (ops fimd_component_ops)
exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops)
exynos-dsi 11c80000.dsi: [drm:samsung_dsim_host_attach] Attached s6e8aa0 device (lanes:4 bpp:24 mode-flags:0x10b)
exynos-drm exynos-drm: bound 11c80000.dsi (ops exynos_dsi_component_ops)
exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops)
[drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1
exynos-hdmi 12d00000.hdmi: [drm:hdmiphy_enable.part.0] *ERROR* PLL could not reach steady state
panel-samsung-s6e8aa0 11c80000.dsi.0: ID: 0xa2, 0x20, 0x8c
exynos-mixer 12c10000.mixer: timeout waiting for VSYNC
------------[ cut here ]------------
WARNING: CPU: 1 PID: 11 at drivers/gpu/drm/drm_atomic_helper.c:1682 drm_atomic_helper_wait_for_vblanks.part.0+0x2b0/0x2b8
[CRTC:70:crtc-1] vblank wait timed out
Modules linked in:
CPU: 1 PID: 11 Comm: kworker/u16:0 Not tainted 6.9.0-rc5-next-20240424 #14913
Hardware name: Samsung Exynos (Flattened Device Tree)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x68/0x88
dump_stack_lvl from __warn+0x7c/0x1c4
__warn from warn_slowpath_fmt+0x11c/0x1a8
warn_slowpath_fmt from drm_atomic_helper_wait_for_vblanks.part.0+0x2b0/0x2b8
drm_atomic_helper_wait_for_vblanks.part.0 from drm_atomic_helper_commit_tail_rpm+0x7c/0x8c
drm_atomic_helper_commit_tail_rpm from commit_tail+0x9c/0x184
commit_tail from drm_atomic_helper_commit+0x168/0x190
drm_atomic_helper_commit from drm_atomic_commit+0xb4/0xe0
drm_atomic_commit from drm_client_modeset_commit_atomic+0x23c/0x27c
drm_client_modeset_commit_atomic from drm_client_modeset_commit_locked+0x60/0x1cc
drm_client_modeset_commit_locked from drm_client_modeset_commit+0x24/0x40
drm_client_modeset_commit from __drm_fb_helper_restore_fbdev_mode_unlocked+0x9c/0xc4
__drm_fb_helper_restore_fbdev_mode_unlocked from drm_fb_helper_set_par+0x2c/0x3c
drm_fb_helper_set_par from fbcon_init+0x3d8/0x550
fbcon_init from visual_init+0xc0/0x108
visual_init from do_bind_con_driver+0x1b8/0x3a4
do_bind_con_driver from do_take_over_console+0x140/0x1ec
do_take_over_console from do_fbcon_takeover+0x70/0xd0
do_fbcon_takeover from fbcon_fb_registered+0x19c/0x1ac
fbcon_fb_registered from register_framebuffer+0x190/0x21c
register_framebuffer from __drm_fb_helper_initial_config_and_unlock+0x350/0x574
__drm_fb_helper_initial_config_and_unlock from exynos_drm_fbdev_client_hotplug+0x6c/0xb0
exynos_drm_fbdev_client_hotplug from drm_client_register+0x58/0x94
drm_client_register from exynos_drm_bind+0x160/0x190
exynos_drm_bind from try_to_bring_up_aggregate_device+0x200/0x2d8
try_to_bring_up_aggregate_device from __component_add+0xb0/0x170
__component_add from mixer_probe+0x74/0xcc
mixer_probe from platform_probe+0x5c/0xb8
platform_probe from really_probe+0xe0/0x3d8
really_probe from __driver_probe_device+0x9c/0x1e4
__driver_probe_device from driver_probe_device+0x30/0xc0
driver_probe_device from __device_attach_driver+0xa8/0x120
__device_attach_driver from bus_for_each_drv+0x80/0xcc
bus_for_each_drv from __device_attach+0xac/0x1fc
__device_attach from bus_probe_device+0x8c/0x90
bus_probe_device from deferred_probe_work_func+0
---truncated--- |
| (Externally Controlled Reference to a Resource in Another Sphere), (Authorization Bypass Through User-Controlled Key) vulnerability in Apache Camel K. Authorized users in a Kubernetes namespace can create a Build resource, controlling the Pod generation in a namespace of their choice, including the operator namespace.
This issue affects Apache Camel K: from 2.0.0 before 2.8.1, from 2.9.0 before 2.9.2, from 2.10.0 before 2.10.1.
Users are recommended to upgrade to version 2.10.1 (or 2.8.1 or 2.9.2), which fixes the issue. |
| Insecure XML parser configuration in Apache CXF's WS-Transfer module may allow attackers to perform XXE attacks.
Users are recommended to upgrade to versions 4.2.1, 4.1.6 or 3.6.11, which fix this issue. |
| Dell PowerFlex Manager, versions 4.6.2 and prior, contains an Open Redirect Vulnerability. An unauthenticated attacker could potentially exploit this vulnerability, leading to a targeted application user being redirected to arbitrary web URLs. The vulnerability could be leveraged by attackers to conduct phishing attacks that cause users to divulge sensitive information. |
| Improper input validation in the external authentication provider flow in Devolutions Server allows an unauthenticated remote attacker to redirect victims to an attacker-controlled domain via a crafted login link.
This issue affects :
* Devolutions Server 2026.1.6.0 through 2026.1.16.0
* Devolutions Server 2025.3.20.0 and earlier |
| Unverified password change in Devolutions Server allows an attacker to change a user's password without providing the previous one via a crafted password change request.
This issue affects :
* Devolutions Server 2026.1.6.0 through 2026.1.16.0
* Devolutions Server 2025.3.20.0 and earlier |
| Concrete CMS 9.5.0 and below is vulnerable to IDOR in AddMessage/UpdateMessage via attachments[] parameter which can lead to file permission bypass. The `AddMessage` and `UpdateMessage` conversation controllers accept user-supplied file attachment IDs and load files directly via `$em->find(File::class, $attachmentID)` without checking per-file permissions (`canViewFile()`). A user who can post in any conversation can reference any file in the CMS file manager by its sequential ID, effectively bypassing the file permission system. The Concrete CMS security team gave this vulnerability a CVSS v.4.0 score of 2.3 with a vector CVSS:4.0/AV:N/AC:L/AT:P/PR:L/UI:N/VC:L/VI:L/VA:N/SC:N/SI:N/SA:N. Thanks Tristan Mandani for reporting. if a site truly has private files, the owner should set up a private storage location https://documentation.concretecms.org/user-guide/editors-reference/dashboard/system-and-maintenance/files/file-storage-locations outside of the webroot so that permissions can be checked on view as well. That way, even if a authorized user attaches a file, or otherwise links to it, unauthorized users won't be able to view the file. |
| Concrete CMS 9.5.0 and below is subject to Insecure Direct Object Reference (IDOR) in the Express Entry Detail block via the exEntryID parameter. This IDOR leads to unauthorized access to all Express form submissions. The Concrete CMS security team gave this vulnerability a CVSS v.4.0 score of 6.3 with vector CVSS:4.0/AV:N/AC:L/AT:P/PR:N/UI:N/VC:L/VI:N/VA:N/SC:N/SI:N/SA:N. Thanks Tristan Madani for reporting. |
| Concrete CMS 9.5.0 and below is vulnerable to IDOR + wrong-authorization-level in the Express association Reorder dialog. This can cause Cross-entity state tampering with view-only permission on one entry. To be affected, a website has to be using express and relying on express entity ordering. The Concrete CMS security team gave this vulnerability a CVSS v.4.0 score of 2.3 with vector CVSS:4.0/AV:N/AC:L/AT:P/PR:L/UI:N/VC:N/VI:L/VA:N/SC:N/SI:N/SA:N. Thanks Winston Crooker for reporting. |
| Authorization bypass in the entry duplication feature in Devolutions Server allows an authenticated user with write access to any vault to copy documentation and attachments from an entry in a vault they cannot access via a crafted save request.
This issue affects :
* Devolutions Server 2026.1.6.0 through 2026.1.16.0
* Devolutions Server 2025.3.20.0 and earlier |
| Smart contract Marginal v1 performs unsafe downcast, allowing attackers to settle a large debt position for a negligible asset cost. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: Fix atomic context locking issue
The ncm_set_alt function was holding a mutex to protect against races
with configfs, which invokes the might-sleep function inside an atomic
context.
Remove the struct net_device pointer from the f_ncm_opts structure to
eliminate the contention. The connection state is now managed by a new
boolean flag to preserve the use-after-free fix from
commit 6334b8e4553c ("usb: gadget: f_ncm: Fix UAF ncm object at re-bind
after usb ep transport error").
BUG: sleeping function called from invalid context
Call Trace:
dump_stack_lvl+0x83/0xc0
dump_stack+0x14/0x16
__might_resched+0x389/0x4c0
__might_sleep+0x8e/0x100
...
__mutex_lock+0x6f/0x1740
...
ncm_set_alt+0x209/0xa40
set_config+0x6b6/0xb40
composite_setup+0x734/0x2b40
... |
| Mattermost versions 11.6.x <= 11.6.0, 11.5.x <= 11.5.3, 11.4.x <= 11.4.4, 10.11.x <= 10.11.14 fail to validate file ownership and access control, which allows an authenticated user to access and download files belonging to other users or teams via crafted Boards API requests using valid file IDs.. Mattermost Advisory ID: MMSA-2026-00620 |
| Tekton Pipelines project provides k8s-style resources for declaring CI/CD-style pipelines. Starting in version 0.43.0 and prior to versions 1.0.2, 1.3.4, 1.6.2, 1.9.3, and 1.11.1, trusted resources verification policies match a resource source string (refSource.URI) against spec.resources[].pattern using regexp.MatchString. In Go, regexp.MatchString reports a match if the pattern matches anywhere in the string, so common unanchored patterns (including examples in tekton documentation) can be bypassed by attacker-controlled source strings that contain the trusted pattern as a substring. This can cause an unintended policy match and change which verification mode/keys apply. Versions 1.0.2, 1.3.4, 1.6.2, 1.9.3, and 1.11.1 fix the issue. |
| XML External Entity (XXE) vulnerability in esaml (and its forks) allows an attacker to cause the system to read local files and incorporate their contents into processed SAML documents, and potentially perform SSRF via crafted SAML messages.
esaml parses attacker-controlled SAML messages using xmerl_scan:string/2 before signature verification without disabling XML entity expansion. On Erlang/OTP versions before 27, Xmerl allows entities by default, enabling pre-signature XXE attacks. An attacker can cause the host to read local files (e.g., Kubernetes-mounted secrets) into the SAML document. If the attacker is not a trusted SAML SP, signature verification will fail and the document is discarded, but file contents may still be exposed through logs or error messages.
This issue affects all versions of esaml, including forks by arekinath, handnot2, and dropbox. Users running on Erlang/OTP 27 or later are not affected due to Xmerl defaulting to entities disabled. |
