| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Prevent division by zero
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| An issue was discovered IW44EncodeCodec.cpp in djvulibre 3.5.28 in allows attackers to cause a denial of service via divide by zero. |
| An issue was discovered IW44Image.cpp in djvulibre 3.5.28 in allows attackers to cause a denial of service via divide by zero. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: cope racing subflow creation in mptcp_rcv_space_adjust
Additional active subflows - i.e. created by the in kernel path
manager - are included into the subflow list before starting the
3whs.
A racing recvmsg() spooling data received on an already established
subflow would unconditionally call tcp_cleanup_rbuf() on all the
current subflows, potentially hitting a divide by zero error on
the newly created ones.
Explicitly check that the subflow is in a suitable state before
invoking tcp_cleanup_rbuf(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-tpg: prevent the risk of a division by zero
As reported by Coverity, the logic at tpg_precalculate_line()
blindly rescales the buffer even when scaled_witdh is equal to
zero. If this ever happens, this will cause a division by zero.
Instead, add a WARN_ON_ONCE() to trigger such cases and return
without doing any precalculation. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: iio: frequency: ad9832: fix division by zero in ad9832_calc_freqreg()
In the ad9832_write_frequency() function, clk_get_rate() might return 0.
This can lead to a division by zero when calling ad9832_calc_freqreg().
The check if (fout > (clk_get_rate(st->mclk) / 2)) does not protect
against the case when fout is 0. The ad9832_write_frequency() function
is called from ad9832_write(), and fout is derived from a text buffer,
which can contain any value. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad7124: fix division by zero in ad7124_set_channel_odr()
In the ad7124_write_raw() function, parameter val can potentially
be zero. This may lead to a division by zero when DIV_ROUND_CLOSEST()
is called within ad7124_set_channel_odr(). The ad7124_write_raw()
function is invoked through the sequence: iio_write_channel_raw() ->
iio_write_channel_attribute() -> iio_channel_write(), with no checks
in place to ensure val is non-zero. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: iio: frequency: ad9834: Validate frequency parameter value
In ad9834_write_frequency() clk_get_rate() can return 0. In such case
ad9834_calc_freqreg() call will lead to division by zero. Checking
'if (fout > (clk_freq / 2))' doesn't protect in case of 'fout' is 0.
ad9834_write_frequency() is called from ad9834_write(), where fout is
taken from text buffer, which can contain any value.
Modify parameters checking.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check denominator pbn_div before used
[WHAT & HOW]
A denominator cannot be 0, and is checked before used.
This fixes 1 DIVIDE_BY_ZERO issue reported by Coverity. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Assign linear_pitch_alignment even for VM
[Description]
Assign linear_pitch_alignment so we don't cause a divide by 0
error in VM environments |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: pn533: Add poll mod list filling check
In case of im_protocols value is 1 and tm_protocols value is 0 this
combination successfully passes the check
'if (!im_protocols && !tm_protocols)' in the nfc_start_poll().
But then after pn533_poll_create_mod_list() call in pn533_start_poll()
poll mod list will remain empty and dev->poll_mod_count will remain 0
which lead to division by zero.
Normally no im protocol has value 1 in the mask, so this combination is
not expected by driver. But these protocol values actually come from
userspace via Netlink interface (NFC_CMD_START_POLL operation). So a
broken or malicious program may pass a message containing a "bad"
combination of protocol parameter values so that dev->poll_mod_count
is not incremented inside pn533_poll_create_mod_list(), thus leading
to division by zero.
Call trace looks like:
nfc_genl_start_poll()
nfc_start_poll()
->start_poll()
pn533_start_poll()
Add poll mod list filling check.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mglru: fix div-by-zero in vmpressure_calc_level()
evict_folios() uses a second pass to reclaim folios that have gone through
page writeback and become clean before it finishes the first pass, since
folio_rotate_reclaimable() cannot handle those folios due to the
isolation.
The second pass tries to avoid potential double counting by deducting
scan_control->nr_scanned. However, this can result in underflow of
nr_scanned, under a condition where shrink_folio_list() does not increment
nr_scanned, i.e., when folio_trylock() fails.
The underflow can cause the divisor, i.e., scale=scanned+reclaimed in
vmpressure_calc_level(), to become zero, resulting in the following crash:
[exception RIP: vmpressure_work_fn+101]
process_one_work at ffffffffa3313f2b
Since scan_control->nr_scanned has no established semantics, the potential
double counting has minimal risks. Therefore, fix the problem by not
deducting scan_control->nr_scanned in evict_folios(). |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again"
Patch series "mm: Avoid possible overflows in dirty throttling".
Dirty throttling logic assumes dirty limits in page units fit into
32-bits. This patch series makes sure this is true (see patch 2/2 for
more details).
This patch (of 2):
This reverts commit 9319b647902cbd5cc884ac08a8a6d54ce111fc78.
The commit is broken in several ways. Firstly, the removed (u64) cast
from the multiplication will introduce a multiplication overflow on 32-bit
archs if wb_thresh * bg_thresh >= 1<<32 (which is actually common - the
default settings with 4GB of RAM will trigger this). Secondly, the
div64_u64() is unnecessarily expensive on 32-bit archs. We have
div64_ul() in case we want to be safe & cheap. Thirdly, if dirty
thresholds are larger than 1<<32 pages, then dirty balancing is going to
blow up in many other spectacular ways anyway so trying to fix one
possible overflow is just moot. |
| Due to a failure in validating the length provided by an attacker-crafted CP2179 packet, Wireshark versions 2.0.0 through 4.0.7 is susceptible to a divide by zero allowing for a denial of service attack. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Add check for granularity in dml ceil/floor helpers
[Why]
Wrapper functions for dcn_bw_ceil2() and dcn_bw_floor2()
should check for granularity is non zero to avoid assert and
divide-by-zero error in dcn_bw_ functions.
[How]
Add check for granularity 0.
(cherry picked from commit f6e09701c3eb2ccb8cb0518e0b67f1c69742a4ec) |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: sysfs: Prevent div by zero
Prevent a division by 0 when monitoring is not enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
ad7780: fix division by zero in ad7780_write_raw()
In the ad7780_write_raw() , val2 can be zero, which might lead to a
division by zero error in DIV_ROUND_CLOSEST(). The ad7780_write_raw()
is based on iio_info's write_raw. While val is explicitly declared that
can be zero (in read mode), val2 is not specified to be non-zero. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/modes: Avoid divide by zero harder in drm_mode_vrefresh()
drm_mode_vrefresh() is trying to avoid divide by zero
by checking whether htotal or vtotal are zero. But we may
still end up with a div-by-zero of vtotal*htotal*... |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Initialize denominators' default to 1
[WHAT & HOW]
Variables used as denominators and maybe not assigned to other values,
should not be 0. Change their default to 1 so they are never 0.
This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity. |
| FreeRDP is a free remote desktop protocol library and clients. Affected versions of FreeRDP are missing input validation in `urbdrc` channel. A malicious server can trick a FreeRDP based client to crash with division by zero. This issue has been addressed in version 2.9.0. All users are advised to upgrade. Users unable to upgrade should not use the `/usb` redirection switch. |
