| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The The Plus Addons for Elementor – Addons for Elementor, Page Templates, Widgets, Mega Menu, WooCommerce plugin for WordPress is vulnerable to Insufficient Verification of Data Authenticity in all versions up to, and including, 6.4.7. This is due to the plugin decrypting and trusting attacker-controlled email_data in an unauthenticated AJAX handler without cryptographic authenticity guarantees. This makes it possible for unauthenticated attackers to tamper with form email routing and redirection values to trigger unauthorized email relay and attacker-controlled redirection via the 'email_data' parameter. |
| Rack::Session is a session management implementation for Rack. From 2.0.0 to before 2.1.2, Rack::Session::Cookie incorrectly handles decryption failures when configured with secrets:. If cookie decryption fails, the implementation falls back to a default decoder instead of rejecting the cookie. This allows an unauthenticated attacker to supply a crafted session cookie that is accepted as valid session data without knowledge of any configured secret. Because this mechanism is used to load session state, an attacker can manipulate session contents and potentially gain unauthorized access. This vulnerability is fixed in 2.1.2. |
| The Rede Itaú for WooCommerce plugin for WordPress is vulnerable to order status manipulation due to insufficient verification of data authenticity in all versions up to, and including, 5.1.2. This is due to the plugin failing to verify the authenticity of payment callbacks. This makes it possible for unauthenticated attackers to manipulate WooCommerce order statuses, either marking unpaid orders as paid, or failed. |
| User interface (ui) misrepresentation of critical information in Microsoft Exchange Server allows an unauthorized attacker to perform spoofing over a network. |
| The Fluent Forms Pro Add On Pack plugin for WordPress is vulnerable to Insufficient Verification of Data Authenticity in all versions up to, and including, 6.1.17. This is due to the PayPal IPN (Instant Payment Notification) verification being disabled by default (`disable_ipn_verification` defaults to `'yes'` in `PayPalSettings.php`). This makes it possible for unauthenticated attackers to send forged PayPal IPN notifications to the publicly accessible IPN endpoint, marking unpaid form submissions as "paid" and triggering post-payment automation (emails, access grants, digital product delivery). |
| When calling base64.b64decode() or related functions the decoding process would stop after encountering the first padded quad regardless of whether there was more information to be processed. This can lead to data being accepted which may be processed differently by other implementations. Use "validate=True" to enable stricter processing of base64 data. |
| An attacker who can execute arbitrary Operating Systems commands, can bypass code signing enforcements in the kernel, and execute arbitrary native code. This vulnerability has been resolved in firmware version 2.800.0000000.8.R.20241111. |
| On Wear OS devices, when Google Messages is configured as the default SMS/MMS/RCS application, the handling of ACTION_SENDTO intents utilizing the sms:, smsto:, mms:, and mmsto: Uniform Resource Identifier (URI) schemes is incorrectly implemented.
Due to this misconfiguration, an attacker capable of invoking an Android intent can exploit this vulnerability to send messages on the user’s behalf to arbitrary receivers without requiring any further user interaction or specific permissions. This allows for the silent and unauthorized transmission of messages from a compromised Wear OS device. |
| gitoxide An idiomatic, lean, fast & safe pure Rust implementation of Git. `gix-path` can be tricked into running another `git.exe` placed in an untrusted location by a limited user account on Windows systems. Windows permits limited user accounts without administrative privileges to create new directories in the root of the system drive. While `gix-path` first looks for `git` using a `PATH` search, in version 0.10.8 it also has a fallback strategy on Windows of checking two hard-coded paths intended to be the 64-bit and 32-bit Program Files directories. Existing functions, as well as the newly introduced `exe_invocation` function, were updated to make use of these alternative locations. This causes facilities in `gix_path::env` to directly execute `git.exe` in those locations, as well as to return its path or whatever configuration it reports to callers who rely on it. Although unusual setups where the system drive is not `C:`, or even where Program Files directories have non-default names, are technically possible, the main problem arises on a 32-bit Windows system. Such a system has no `C:\Program Files (x86)` directory. A limited user on a 32-bit Windows system can therefore create the `C:\Program Files (x86)` directory and populate it with arbitrary contents. Once a payload has been placed at the second of the two hard-coded paths in this way, other user accounts including administrators will execute it if they run an application that uses `gix-path` and do not have `git` in a `PATH` directory. (While having `git` found in a `PATH` search prevents exploitation, merely having it installed in the default location under the real `C:\Program Files` directory does not. This is because the first hard-coded path's `mingw64` component assumes a 64-bit installation.). Only Windows is affected. Exploitation is unlikely except on a 32-bit system. In particular, running a 32-bit build on a 64-bit system is not a risk factor. Furthermore, the attacker must have a user account on the system, though it may be a relatively unprivileged account. Such a user can perform privilege escalation and execute code as another user, though it may be difficult to do so reliably because the targeted user account must run an application or service that uses `gix-path` and must not have `git` in its `PATH`. The main exploitable configuration is one where Git for Windows has been installed but not added to `PATH`. This is one of the options in its installer, though not the default option. Alternatively, an affected program that sanitizes its `PATH` to remove seemingly nonessential directories could allow exploitation. But for the most part, if the target user has configured a `PATH` in which the real `git.exe` can be found, then this cannot be exploited. This issue has been addressed in release version 0.10.9 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| An attacker spoofing answers to ECS enabled requests sent out by the Recursor has a chance of success higher than non-ECS enabled queries.
The updated version include various mitigations against spoofing attempts of ECS enabled queries by chaining ECS enabled requests and enforcing stricter validation of the received answers.
The most strict mitigation done when the new setting outgoing.edns_subnet_harden (old style name edns-subnet-harden) is enabled. |
| Invision Community through 4.7.16 allows remote code execution via the applications/core/modules/admin/editor/toolbar.php IPS\core\modules\admin\editor\_toolbar::addPlugin() method. This method handles uploaded ZIP files that are extracted into the applications/core/interface/ckeditor/ckeditor/plugins/ directory without properly verifying their content. This can be exploited by admin users (with the toolbar_manage permission) to write arbitrary PHP files into that directory, leading to execution of arbitrary PHP code in the context of the web server user. |
| Ceph is a distributed object, block, and file storage platform. In versions 19.2.3 and below, it is possible to send an JWT that has "none" as JWT alg. And by doing so the JWT signature is not checked. The vulnerability is most likely in the RadosGW OIDC provider. As of time of publication, a known patched version has yet to be published. |
| dnsjava is an implementation of DNS in Java. Records in DNS replies are not checked for their relevance to the query, allowing an attacker to respond with RRs from different zones. This vulnerability is fixed in 3.6.0. |
| Vela is a Pipeline Automation (CI/CD) framework built on Linux container technology written in Golang. Prior to versions 0.25.3 and 0.26.3, by spoofing a webhook payload with a specific set of headers and body data, an attacker could transfer ownership of a repository and its repo level secrets to a separate repository. These secrets could be exfiltrated by follow up builds to the repository. Users with an enabled repository with access to repo level CI secrets in Vela are vulnerable to the exploit, and any user with access to the CI instance and the linked source control manager can perform the exploit. Versions 0.25.3 and 0.26.3 fix the issue. No known workarounds are available. |
| A vulnerability has been found in IROAD Dash Cam X5 and Dash Cam X6 up to 20250308 and classified as problematic. This vulnerability affects unknown code of the component Domain Handler. The manipulation of the argument Domain Name leads to origin validation error. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. |
| Insufficient Verification of Data Authenticity vulnerability in GE Vernova UR IED family devices allows an authenticated user to install a modified firmware.
The firmware signature verification is enforced only on the client-side dedicated software Enervista UR Setup, allowing the integration check to be bypassed. |
| regclient is a Docker and OCI Registry Client in Go. A malicious registry could return a different digest for a pinned manifest without detection. This vulnerability is fixed in 0.7.1. |
| Clerk helps developers build user management. Applications that use the verifyWebhook() helper to verify incoming Clerk webhooks are susceptible to accepting improperly signed webhook events. The issue was resolved in @clerk/backend 2.4.0. |
| libsignal-service-rs is a Rust version of the libsignal-service-java library which implements the core functionality to communicate with Signal servers. Prior to commit 82d70f6720e762898f34ae76b0894b0297d9b2f8, any contact may forge a sync message, impersonating another device of the local user. The origin of sync messages is not checked. Patched libsignal-service can be found after commit 82d70f6720e762898f34ae76b0894b0297d9b2f8. The `Metadata` struct contains an additional `was_encrypted` field, which breaks the API, but should be easily resolvable. No known workarounds are available. |
| Dovecot accepts dot LF DOT LF symbol as end of DATA command. RFC requires that it should always be CR LF DOT CR LF. This causes Dovecot to convert single mail with LF DOT LF in middle, into two emails when relaying to SMTP. Dovecot will split mail with LF DOT LF into two mails. Upgrade to latest released version. No publicly available exploits are known. |
