| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/tls: Fix flipped sign in tls_err_abort() calls
sk->sk_err appears to expect a positive value, a convention that ktls
doesn't always follow and that leads to memory corruption in other code.
For instance,
[kworker]
tls_encrypt_done(..., err=<negative error from crypto request>)
tls_err_abort(.., err)
sk->sk_err = err;
[task]
splice_from_pipe_feed
...
tls_sw_do_sendpage
if (sk->sk_err) {
ret = -sk->sk_err; // ret is positive
splice_from_pipe_feed (continued)
ret = actor(...) // ret is still positive and interpreted as bytes
// written, resulting in underflow of buf->len and
// sd->len, leading to huge buf->offset and bogus
// addresses computed in later calls to actor()
Fix all tls_err_abort() callers to pass a negative error code
consistently and centralize the error-prone sign flip there, throwing in
a warning to catch future misuse and uninlining the function so it
really does only warn once. |
| In the Linux kernel, the following vulnerability has been resolved:
net: vlan: fix underflow for the real_dev refcnt
Inject error before dev_hold(real_dev) in register_vlan_dev(),
and execute the following testcase:
ip link add dev dummy1 type dummy
ip link add name dummy1.100 link dummy1 type vlan id 100
ip link del dev dummy1
When the dummy netdevice is removed, we will get a WARNING as following:
=======================================================================
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 2 PID: 0 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0
and an endless loop of:
=======================================================================
unregister_netdevice: waiting for dummy1 to become free. Usage count = -1073741824
That is because dev_put(real_dev) in vlan_dev_free() be called without
dev_hold(real_dev) in register_vlan_dev(). It makes the refcnt of real_dev
underflow.
Move the dev_hold(real_dev) to vlan_dev_init() which is the call-back of
ndo_init(). That makes dev_hold() and dev_put() for vlan's real_dev
symmetrical. |
| The NVIDIA NVDebug tool contains a vulnerability that may allow an actor to gain access to restricted components. A successful exploit of this vulnerability may lead to information disclosure. |
| A buffer underwrite ('buffer underflow') vulnerability in the administrative interface of Fortinet FortiOS version 7.2.0 through 7.2.3, version 7.0.0 through 7.0.6, version 6.4.0 through 6.4.11 and version 6.2.12 and below, FortiProxy version 7.2.0 through 7.2.2, version 7.0.0 through 7.0.8, version 2.0.12 and below and FortiOS-6K7K version 7.0.5, version 6.4.0 through 6.4.10 and version 6.2.0 through 6.2.10 and below allows a remote unauthenticated attacker to execute arbitrary code or commands via specifically crafted requests. |
| In Bluetooth FW, there is a possible system crash due to an uncaught exception. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS09741871; Issue ID: MSV-3317. |
| In Bluetooth FW, there is a possible system crash due to an uncaught exception. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS09752821; Issue ID: MSV-3342. |
| B&R Automation Studio Upgrade Service and B&R Technology Guarding use insufficient cryptography for communication to the upgrade and the licensing servers. A network-based attacker could exploit the vulnerability to execute arbitrary code on the products or sniff sensitive data. |
| Observable behavioral in power management throttling for some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via network access. |
| In the Linux kernel, the following vulnerability has been resolved:
net: amd-xgbe: Fix skb data length underflow
There will be BUG_ON() triggered in include/linux/skbuff.h leading to
intermittent kernel panic, when the skb length underflow is detected.
Fix this by dropping the packet if such length underflows are seen
because of inconsistencies in the hardware descriptors. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Disable coherent dumb buffers without 3d
Coherent surfaces make only sense if the host renders to them using
accelerated apis. Without 3d the entire content of dumb buffers stays
in the guest making all of the extra work they're doing to synchronize
between guest and host useless.
Configurations without 3d also tend to run with very low graphics
memory limits. The pinned console fb, mob cursors and graphical login
manager tend to run out of 16MB graphics memory that those guests use.
Fix it by making sure the coherent dumb buffers are only used on
configs with 3d enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix hang in nilfs_lookup_dirty_data_buffers()
Syzbot reported a hang issue in migrate_pages_batch() called by mbind()
and nilfs_lookup_dirty_data_buffers() called in the log writer of nilfs2.
While migrate_pages_batch() locks a folio and waits for the writeback to
complete, the log writer thread that should bring the writeback to
completion picks up the folio being written back in
nilfs_lookup_dirty_data_buffers() that it calls for subsequent log
creation and was trying to lock the folio. Thus causing a deadlock.
In the first place, it is unexpected that folios/pages in the middle of
writeback will be updated and become dirty. Nilfs2 adds a checksum to
verify the validity of the log being written and uses it for recovery at
mount, so data changes during writeback are suppressed. Since this is
broken, an unclean shutdown could potentially cause recovery to fail.
Investigation revealed that the root cause is that the wait for writeback
completion in nilfs_page_mkwrite() is conditional, and if the backing
device does not require stable writes, data may be modified without
waiting.
Fix these issues by making nilfs_page_mkwrite() wait for writeback to
finish regardless of the stable write requirement of the backing device. |
| Ember ZNet between v7.2.0 and v7.4.0 used software AES-CCM instead of integrated hardware cryptographic accelerators, potentially increasing risk of electromagnetic and differential power analysis sidechannel attacks. |
| An issue was discovered on the D-Link DWR-932B router. WPS PIN generation is based on srand(time(0)) seeding. |
| A buffer underflow vulnerability exists in the way Hword of Hancom Office 2020 version 11.0.0.5357 parses XML-based office files. A specially-crafted malformed file can cause memory corruption by using memory before buffer start, which can lead to code execution. A victim would need to access a malicious file to trigger this vulnerability. |
| c-ares is an asynchronous resolver library. ares_inet_net_pton() is vulnerable to a buffer underflow for certain ipv6 addresses, in particular "0::00:00:00/2" was found to cause an issue. C-ares only uses this function internally for configuration purposes which would require an administrator to configure such an address via ares_set_sortlist(). However, users may externally use ares_inet_net_pton() for other purposes and thus be vulnerable to more severe issues. This issue has been fixed in 1.19.1. |
| Dell PowerProtect DD, versions prior to DDOS 8.3.0.0, 7.10.1.50, and 7.13.1.10 contains a use of a Cryptographic Primitive with a Risky Implementation vulnerability. A remote attacker could potentially exploit this vulnerability, leading to Information tampering. |
| Dell Key Trust Platform, v3.0.6 and prior, contains Use of a Cryptographic Primitive with a Risky Implementation vulnerability. A local privileged attacker could potentially exploit this vulnerability, leading to privileged information disclosure. |
| There is a buffer error vulnerability in some Huawei product. An unauthenticated attacker may send special UPNP message to the affected products. Due to insufficient input validation of some value, successful exploit may cause some service abnormal. (Vulnerability ID: HWPSIRT-2017-08234)
This vulnerability has been assigned a Common Vulnerabilities and Exposures (CVE) ID: CVE-2020-9086. |
| Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. It has been discovered that an unprivileged pod in a different namespace on the same cluster could connect to the Redis server on port 6379. Despite having installed the latest version of the VPC CNI plugin on the EKS cluster, it requires manual enablement through configuration to enforce network policies. This raises concerns that many clients might unknowingly have open access to their Redis servers. This vulnerability could lead to Privilege Escalation to the level of cluster controller, or to information leakage, affecting anyone who does not have strict access controls on their Redis instance. This issue has been patched in version(s) 2.8.19, 2.9.15 and 2.10.10. |
| Animate versions 23.0.8, 24.0.5 and earlier are affected by a Buffer Underwrite ('Buffer Underflow') vulnerability that could result in arbitrary code execution in the context of the current user. An attacker could leverage this vulnerability to manipulate memory in such a way that they could execute code under the privileges of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
