| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| XX-Net V5.16.6 contains a WebSocket frame parsing vulnerability in the WebSocket_receive_worker routine of simple_http_server.py that allows attackers to cause corrupted application data by sending unmasked WebSocket frames. The server unconditionally reads 4 bytes as a masking key regardless of whether the MASK bit is set in the frame header, causing the first 4 bytes of payload to be consumed as a mask key and the remaining payload to be incorrectly XOR-decoded, resulting in data corruption alongside missing RSV bit, opcode, and FIN fragmentation validations. |
| Improper Validation of Specified Quantity in Input vulnerability in Ads by WPQuads Ads by WPQuads quick-adsense-reloaded allows Input Data Manipulation.This issue affects Ads by WPQuads: from n/a through <= 3.0.2. |
| Improper Validation of Specified Quantity in Input vulnerability in Ads by WPQuads Ads by WPQuads quick-adsense-reloaded allows Manipulating Hidden Fields.This issue affects Ads by WPQuads: from n/a through <= 3.0.2. |
| pam_usb provides hardware authentication for Linux using ordinary removable media. Prior to 0.9.1, src/conf.c allocates heap memory proportional to n_devices, a count derived from libxml2 XPath evaluation of the config file, without first enforcing an upper bound. On 32-bit targets (armv7l, i686 -- both listed in the project Makefile), the multiplication n_devices * sizeof(t_pusb_device) wraps around size_t, causing xmalloc() to receive a very small size. Because xmalloc() only calls abort() on NULL return, a small-but-non-NULL allocation is accepted, and subsequent array writes overflow the heap. This vulnerability is fixed in 0.9.1. |
| A stack-based buffer overflow vulnerability in the charging controller’s signal-processing logic allows an attacker with physical access to the charging interface to supply message fields that exceed expected bounds. Because the input is not sufficiently validated, memory corruption may occur, which can lead to execution of unauthorized code with elevated privileges. |
| Nozomi Networks Labs identified a CWE-125: Out-of-bounds Read in Waterfall WF-500 RX Host in version 7.10.0.0 R2601141040 that allows attackers with access to the TX Host to execute code on the RX Host. |
| A vulnerability was determined in TRENDnet TEW-432BRP 3.10B20. Affected by this vulnerability is the function formSetRoute of the file /goform/formSetRoute. This manipulation of the argument ip/mask/gateway causes stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. The vendor explains: "This product has been EOL for 15 years (since 2009). As the item has been EOL for such a long time, we are not able to replicate or fix any vulnerabilities." This vulnerability only affects products that are no longer supported by the maintainer. |
| A vulnerability was detected in Shibby Tomato 1.28. Impacted is the function sub_90F0 of the file multimon.cgi. The manipulation results in stack-based buffer overflow. The attack can be launched remotely. This project is superseded by FreshTomato. This vulnerability only affects products that are no longer supported by the maintainer. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix out-of-bounds memset in command slot handling
The remaining space in a command slot may be smaller than the size of
the command header. Clearing the command header with memset() before
verifying the available slot space can result in an out-of-bounds write
and memory corruption.
Fix this by moving the memset() call after the size validation. |
| The ToASCII and ToUnicode functions incorrectly accept Punycode-encoded labels that decode to an ASCII-only label. For example, ToUnicode("xn--example-.com") incorrectly returns the name "example.com" rather than an error. This behavior can lead to privilege escalation in programs using the idna package. For example, a program which performs privilege checks on the ASCII hostname may reject "example.com" but permit "xn--example-.com". If that program subsequently converts the ASCII hostname to Unicode, it will inadvertently permits access to the Unicode name "example.com". |
| OpenSC before 0.27.0-rc1, fixed in commit 3f24f0b, contains a stack buffer overflow vulnerability in piv_process_history() in src/libopensc/card-piv.c that allows physically present attackers to trigger memory corruption by presenting a crafted PIV smart card or USB device returning a URL field longer than 118 bytes in the Key History Object ASN.1 response. |
| OpenSC before 0.27.0, fixed in commit 0358817, contains a stack and heap buffer overrun vulnerability in the do_key_value() function in src/pkcs15init/profile.c that allows attackers to corrupt memory by supplying a crafted profile configuration file. During pkcs15-init invocation, a key value entry beginning with '=' followed by more than sizeof(keybuf) characters is copied into keybuf via memcpy without a length check, causing both stack and heap buffer overruns. |
| A security flaw has been discovered in TRENDnet TEW-432BRP 3.10B20. This affects the function formSetPortTr of the file /goform/formSetPortTr. Performing a manipulation of the argument special_name results in stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks. The vendor explains: "This product has been EOL for 15 years (since 2009). As the item has been EOL for such a long time, we are not able to replicate or fix any vulnerabilities." This vulnerability only affects products that are no longer supported by the maintainer. |
| CODESYS Control Runtime system before 3.5.17.10 has a Heap-based Buffer Overflow. |
| A CWE-125: Out-of-bounds Read vulnerability that could cause a Denial of Service on the Modicon PLC controller / simulator when updating the controller application with a specially crafted project file exists in Modicon M580 CPU (part numbers BMEP* and BMEH*, all versions), Modicon M340 CPU (part numbers BMXP34*, all versions), Modicon MC80 (part numbers BMKC80*, all versions), Modicon Momentum Ethernet CPU (part numbers 171CBU*, all versions), PLC Simulator for EcoStruxureª Control Expert, including all Unity Pro versions (former name of EcoStruxureª Control Expert, all versions), PLC Simulator for EcoStruxureª Process Expert including all HDCS versions (former name of EcoStruxureª Process Expert, all versions), Modicon Quantum CPU (part numbers 140CPU*, all versions), Modicon Premium CPU (part numbers TSXP5*, all versions). |
| Insufficient validation of untrusted input in ANGLE in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to execute arbitrary code via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: fix a potential clc buffer length underflow
The buf_len is used to limit the iterations for retrieving the country
power setting and may underflow under certain conditions due to changes
in the power table in CLC.
This underflow leads to an almost infinite loop or an invalid power
setting resulting in driver initialization failure. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: fix uninit-value by validating catalog record size
Syzbot reported a KMSAN uninit-value issue in hfsplus_strcasecmp(). The
root cause is that hfs_brec_read() doesn't validate that the on-disk
record size matches the expected size for the record type being read.
When mounting a corrupted filesystem, hfs_brec_read() may read less data
than expected. For example, when reading a catalog thread record, the
debug output showed:
HFSPLUS_BREC_READ: rec_len=520, fd->entrylength=26
HFSPLUS_BREC_READ: WARNING - entrylength (26) < rec_len (520) - PARTIAL READ!
hfs_brec_read() only validates that entrylength is not greater than the
buffer size, but doesn't check if it's less than expected. It successfully
reads 26 bytes into a 520-byte structure and returns success, leaving 494
bytes uninitialized.
This uninitialized data in tmp.thread.nodeName then gets copied by
hfsplus_cat_build_key_uni() and used by hfsplus_strcasecmp(), triggering
the KMSAN warning when the uninitialized bytes are used as array indices
in case_fold().
Fix by introducing hfsplus_brec_read_cat() wrapper that:
1. Calls hfs_brec_read() to read the data
2. Validates the record size based on the type field:
- Fixed size for folder and file records
- Variable size for thread records (depends on string length)
3. Returns -EIO if size doesn't match expected
For thread records, check against HFSPLUS_MIN_THREAD_SZ before reading
nodeName.length to avoid reading uninitialized data at call sites that
don't zero-initialize the entry structure.
Also initialize the tmp variable in hfsplus_find_cat() as defensive
programming to ensure no uninitialized data even if validation is
bypassed. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix bounds check in check_xattrs() to prevent out-of-bounds access
The bounds check for the next xattr entry in check_xattrs() uses
(void *)next >= end, which allows next to point within sizeof(u32)
bytes of end. On the next loop iteration, IS_LAST_ENTRY() reads 4
bytes via *(__u32 *)(entry), which can overrun the valid xattr region.
For example, if next lands at end - 1, the check passes since
next < end, but IS_LAST_ENTRY() reads 4 bytes starting at end - 1,
accessing 3 bytes beyond the valid region.
Fix this by changing the check to (void *)next + sizeof(u32) > end,
ensuring there is always enough space for the IS_LAST_ENTRY() read
on the subsequent iteration. |
| Ubuntu Linux 6.8, 6.17 and 7.0 contain AppArmor SAUCE patches which incorrectly validate the size of an internal structure, leading to an out-of-bounds read in notification handling code. The bug can be triggered by an unprivileged local user and can result in information disclosure from adjacent slab objects. |
