| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: ti: icssg-prueth: Fix memory leak in XDP_DROP for non-zero-copy mode
Page recycling was removed from the XDP_DROP path in emac_run_xdp() to
avoid conflicts with AF_XDP zero-copy mode, which uses xsk_buff_free()
instead.
However, this causes a memory leak when running XDP programs that drop
packets in non-zero-copy mode (standard page pool mode). The pages are
never returned to the page pool, leading to OOM conditions.
Fix this by handling cleanup in the caller, emac_rx_packet().
When emac_run_xdp() returns ICSSG_XDP_CONSUMED for XDP_DROP, the
caller now recycles the page back to the page pool. The zero-copy
path, emac_rx_packet_zc() already handles cleanup correctly with
xsk_buff_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: Fix cred ref leak in nfsd_nl_listener_set_doit().
nfsd_nl_listener_set_doit() uses get_current_cred() without
put_cred().
As we can see from other callers, svc_xprt_create_from_sa()
does not require the extra refcount.
nfsd_nl_listener_set_doit() is always in the process context,
sendmsg(), and current->cred does not go away.
Let's use current_cred() in nfsd_nl_listener_set_doit(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix memory leak in xe_vm_madvise_ioctl
When check_bo_args_are_sane() validation fails, jump to the new
free_vmas cleanup label to properly free the allocated resources.
This ensures proper cleanup in this error path.
(cherry picked from commit 29bd06faf727a4b76663e4be0f7d770e2d2a7965) |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix memory leaks in ceph_mdsc_build_path()
Add __putname() calls to error code paths that did not free the "path"
pointer obtained by __getname(). If ownership of this pointer is not
passed to the caller via path_info.path, the function must free it
before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fc: release admin tagset if init fails
nvme_fabrics creates an NVMe/FC controller in following path:
nvmf_dev_write()
-> nvmf_create_ctrl()
-> nvme_fc_create_ctrl()
-> nvme_fc_init_ctrl()
nvme_fc_init_ctrl() allocates the admin blk-mq resources right after
nvme_add_ctrl() succeeds. If any of the subsequent steps fail (changing
the controller state, scheduling connect work, etc.), we jump to the
fail_ctrl path, which tears down the controller references but never
frees the admin queue/tag set. The leaked blk-mq allocations match the
kmemleak report seen during blktests nvme/fc.
Check ctrl->ctrl.admin_tagset in the fail_ctrl path and call
nvme_remove_admin_tag_set() when it is set so that all admin queue
allocations are reclaimed whenever controller setup aborts. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - Fix ADF_DEV_RESET_SYNC memory leak
Using completion_done to determine whether the caller has gone
away only works after a complete call. Furthermore it's still
possible that the caller has not yet called wait_for_completion,
resulting in another potential UAF.
Fix this by making the caller use cancel_work_sync and then freeing
the memory safely. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Mark target gfn of emulated atomic instruction as dirty
When emulating an atomic access on behalf of the guest, mark the target
gfn dirty if the CMPXCHG by KVM is attempted and doesn't fault. This
fixes a bug where KVM effectively corrupts guest memory during live
migration by writing to guest memory without informing userspace that the
page is dirty.
Marking the page dirty got unintentionally dropped when KVM's emulated
CMPXCHG was converted to do a user access. Before that, KVM explicitly
mapped the guest page into kernel memory, and marked the page dirty during
the unmap phase.
Mark the page dirty even if the CMPXCHG fails, as the old data is written
back on failure, i.e. the page is still written. The value written is
guaranteed to be the same because the operation is atomic, but KVM's ABI
is that all writes are dirty logged regardless of the value written. And
more importantly, that's what KVM did before the buggy commit.
Huge kudos to the folks on the Cc list (and many others), who did all the
actual work of triaging and debugging.
base-commit: 6769ea8da8a93ed4630f1ce64df6aafcaabfce64 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc2: Fix memory leak in dwc2_hcd_init
usb_create_hcd will alloc memory for hcd, and we should
call usb_put_hcd to free it when platform_get_resource()
fails to prevent memory leak.
goto error2 label instead error1 to fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/zcrx: fix page array leak
d9f595b9a65e ("io_uring/zcrx: fix leaking pages on sg init fail") fixed
a page leakage but didn't free the page array, release it as well. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm_user: fix info leak in build_mapping()
struct xfrm_usersa_id has a one-byte padding hole after the proto
field, which ends up never getting set to zero before copying out to
userspace. Fix that up by zeroing out the whole structure before
setting individual variables. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/sync: Fix user fence leak on alloc failure
When dma_fence_chain_alloc() fails, properly release the user fence
reference to prevent a memory leak.
(cherry picked from commit a5d5634cde48a9fcd68c8504aa07f89f175074a0) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: samsung-dsim: Fix memory leak in error path
In samsung_dsim_host_attach(), drm_bridge_add() is called to add the
bridge. However, if samsung_dsim_register_te_irq() or
pdata->host_ops->attach() fails afterwards, the function returns
without removing the bridge, causing a memory leak.
Fix this by adding proper error handling with goto labels to ensure
drm_bridge_remove() is called in all error paths. Also ensure that
samsung_dsim_unregister_te_irq() is called if the attach operation
fails after the TE IRQ has been registered.
samsung_dsim_unregister_te_irq() function is moved without changes
to be before samsung_dsim_host_attach() to avoid forward declaration. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix reservation leak in some error paths when inserting inline extent
If we fail to allocate a path or join a transaction, we return from
__cow_file_range_inline() without freeing the reserved qgroup data,
resulting in a leak. Fix this by ensuring we call btrfs_qgroup_free_data()
in such cases. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_queue: fix entry leak in bridge verdict error path
nfqnl_recv_verdict() calls find_dequeue_entry() to remove the queue
entry from the queue data structures, taking ownership of the entry.
For PF_BRIDGE packets, it then calls nfqa_parse_bridge() to parse VLAN
attributes. If nfqa_parse_bridge() returns an error (e.g. NFQA_VLAN
present but NFQA_VLAN_TCI missing), the function returns immediately
without freeing the dequeued entry or its sk_buff.
This leaks the nf_queue_entry, its associated sk_buff, and all held
references (net_device refcounts, struct net refcount). Repeated
triggering exhausts kernel memory.
Fix this by dropping the entry via nfqnl_reinject() with NF_DROP verdict
on the error path, consistent with other error handling in this file. |
| In the Linux kernel, the following vulnerability has been resolved:
mctp: i2c: fix skb memory leak in receive path
When 'midev->allow_rx' is false, the newly allocated skb isn't consumed
by netif_rx(), it needs to free the skb directly. |
| In the Linux kernel, the following vulnerability has been resolved:
e1000/e1000e: Fix leak in DMA error cleanup
If an error is encountered while mapping TX buffers, the driver should
unmap any buffers already mapped for that skb.
Because count is incremented after a successful mapping, it will always
match the correct number of unmappings needed when dma_error is reached.
Decrementing count before the while loop in dma_error causes an
off-by-one error. If any mapping was successful before an unsuccessful
mapping, exactly one DMA mapping would leak.
In these commits, a faulty while condition caused an infinite loop in
dma_error:
Commit 03b1320dfcee ("e1000e: remove use of skb_dma_map from e1000e
driver")
Commit 602c0554d7b0 ("e1000: remove use of skb_dma_map from e1000 driver")
Commit c1fa347f20f1 ("e1000/e1000e/igb/igbvf/ixgb/ixgbe: Fix tests of
unsigned in *_tx_map()") fixed the infinite loop, but introduced the
off-by-one error.
This issue may still exist in the igbvf driver, but I did not address it
in this patch. |
| A specially crafted domain can be used to cause a memory leak in a BIND resolver simply by querying this domain.
This issue affects BIND 9 versions 9.20.0 through 9.20.20, 9.21.0 through 9.21.19, and 9.20.9-S1 through 9.20.20-S1.
BIND 9 versions 9.18.0 through 9.18.46 and 9.18.11-S1 through 9.18.46-S1 are NOT affected. |
| In the Linux kernel, the following vulnerability has been resolved:
eventpoll: defer struct eventpoll free to RCU grace period
In certain situations, ep_free() in eventpoll.c will kfree the epi->ep
eventpoll struct while it still being used by another concurrent thread.
Defer the kfree() to an RCU callback to prevent UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid allocate block from corrupted group in ext4_mb_find_by_goal()
There's issue as follows:
...
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2243 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2239 at logical offset 0 with max blocks 1 with error 117
EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost
EXT4-fs (mmcblk0p1): error count since last fsck: 1
EXT4-fs (mmcblk0p1): initial error at time 1765597433: ext4_mb_generate_buddy:760
EXT4-fs (mmcblk0p1): last error at time 1765597433: ext4_mb_generate_buddy:760
...
According to the log analysis, blocks are always requested from the
corrupted block group. This may happen as follows:
ext4_mb_find_by_goal
ext4_mb_load_buddy
ext4_mb_load_buddy_gfp
ext4_mb_init_cache
ext4_read_block_bitmap_nowait
ext4_wait_block_bitmap
ext4_validate_block_bitmap
if (!grp || EXT4_MB_GRP_BBITMAP_CORRUPT(grp))
return -EFSCORRUPTED; // There's no logs.
if (err)
return err; // Will return error
ext4_lock_group(ac->ac_sb, group);
if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info))) // Unreachable
goto out;
After commit 9008a58e5dce ("ext4: make the bitmap read routines return
real error codes") merged, Commit 163a203ddb36 ("ext4: mark block group
as corrupt on block bitmap error") is no real solution for allocating
blocks from corrupted block groups. This is because if
'EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info)' is true, then
'ext4_mb_load_buddy()' may return an error. This means that the block
allocation will fail.
Therefore, check block group if corrupted when ext4_mb_load_buddy()
returns error. |
| In the Linux kernel, the following vulnerability has been resolved:
net: skb: fix cross-cache free of KFENCE-allocated skb head
SKB_SMALL_HEAD_CACHE_SIZE is intentionally set to a non-power-of-2
value (e.g. 704 on x86_64) to avoid collisions with generic kmalloc
bucket sizes. This ensures that skb_kfree_head() can reliably use
skb_end_offset to distinguish skb heads allocated from
skb_small_head_cache vs. generic kmalloc caches.
However, when KFENCE is enabled, kfence_ksize() returns the exact
requested allocation size instead of the slab bucket size. If a caller
(e.g. bpf_test_init) allocates skb head data via kzalloc() and the
requested size happens to equal SKB_SMALL_HEAD_CACHE_SIZE, then
slab_build_skb() -> ksize() returns that exact value. After subtracting
skb_shared_info overhead, skb_end_offset ends up matching
SKB_SMALL_HEAD_HEADROOM, causing skb_kfree_head() to incorrectly free
the object to skb_small_head_cache instead of back to the original
kmalloc cache, resulting in a slab cross-cache free:
kmem_cache_free(skbuff_small_head): Wrong slab cache. Expected
skbuff_small_head but got kmalloc-1k
Fix this by always calling kfree(head) in skb_kfree_head(). This keeps
the free path generic and avoids allocator-specific misclassification
for KFENCE objects. |
