| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| cpp-httplib is a C++11 single-file header-only cross platform HTTP/HTTPS library. Prior to 0.43.4, negative chunk-size in chunked Transfer-Encoding causes unbounded memory allocation and process crash. The ChunkedDecoder::read_payload function in cpp-httplib (httplib.h) parses the chunk-size field of HTTP chunked transfer encoding using std::strtoul(). Per the C standard (§7.22.1.4), strtoul silently accepts a leading minus sign, performing unsigned wrap-around: strtoul("-2", …, 16) returns ULONG_MAX − 1 (0xFFFFFFFFFFFFFFFE). The library's only guard (line 12833) rejects ULONG_MAX (the result of "-1"), but any other negative value such as "-2" passes validation. The resulting near-maximum value is stored in chunk_remaining and controls how many bytes the server's read loop consumes from the network. This vulnerability is fixed in 0.43.4. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.12.1, an attacker who uses this vulnerability can craft a PDF which leads to large memory usage. This requires parsing large XMP metadata, possibly with lots of unnecessary elements. This vulnerability is fixed in 6.12.1. |
| Klever-Go is the Go implementation of the Klever blockchain protocol. Prior to 1.7.17, a remote, unauthenticated denial-of-service vulnerability in Batch.Decompress (data/batch/batch.go) allows any peer that participates in a topic served by MultiDataInterceptor to allocate multi-gigabyte heaps on the receiving node from a sub-50 KiB gossip payload. A single packet is sufficient to OOM-kill a validator with conventional memory provisioning. Fleet-wide application affects chain liveness. This vulnerability is fixed in 1.7.17. |
| ABB, Phoenix Contact, Schneider Electric, Siemens, WAGO - Programmable Logic Controllers, multiple versions. Researchers have found some controllers are susceptible to a denial-of-service attack due to a flood of network packets. |
| Uncontrolled resource consumption in the Wireless Control Module (WCM) of the Indian Motorcycle Scout Bobber + Tech 2025 model year allows an adjacent-network attacker with write access to the in-vehicle network to permanently immobilize the motorcycle. The WCM enforces a brute-force lockout on the immobilizer authentication algorithm, but the lockout counter is reachable by any unauthenticated message, has no session binding, and does not reset on power cycle. An attacker can deliberately trip the lockout with a small number of crafted frames, leaving the bike un-startable until dealer service. Specific thresholds have been withheld pending vendor remediation. |
| IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 is vulnerable to a denial of service when a specially crafted query is run with range partitioned tables. |
| Synapse is an open source Matrix homeserver implementation. Prior to 1.152.1, local authenticated users can cause Synapse to starve other requests of CPU and lead to other requests failing, causing other users to be denied service. This vulnerability is fixed in 1.152.1. |
| An Environment (CWE-2) vulnerability exists in SoMachine Basic, all versions, and Modicon M221(all references, all versions prior to firmware V1.10.0.0) which could cause cycle time impact when flooding the M221 ethernet interface while the Ethernet/IP adapter is activated. |
| AutoGPT is a workflow automation platform for creating, deploying, and managing continuous artificial intelligence agents. Prior to 0.6.59, POST /api/blocks/{block_id}/execute endpoint executes blocks without consuming any credits, regardless of the user's balance. The credit check that exists in the graph execution path (manager.py) is never reached when blocks are called directly via the external API, allowing unlimited free execution of all blocks. This vulnerability is fixed in 0.6.59. |
| Vulnerability in the Java SE, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Swing). Supported versions that are affected are Java SE: 7u311, 8u301, 11.0.12, 17; Oracle GraalVM Enterprise Edition: 20.3.3 and 21.2.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Java SE, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Java SE, Oracle GraalVM Enterprise Edition. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS 3.1 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L). |
| opentelemetry-java is the Java implementation of the OpenTelemetry API for recording telemetry, and SDK for managing telemetry recorded by the API. Prior to 1.62.0, a vulnerability affects the baggage propagation implementation in opentelemetry-api and opentelemetry-extension-trace-propagators. Parsing oversized baggage causes unbounded memory allocation and CPU consumption. Because baggage is automatically re-injected into every outgoing request, the effect can fan out to downstream services that never received the original malicious request. This vulnerability is fixed in 1.62.0. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conncount: increase the connection clean up limit to 64
After the optimization to only perform one GC per jiffy, a new problem
was introduced. If more than 8 new connections are tracked per jiffy the
list won't be cleaned up fast enough possibly reaching the limit
wrongly.
In order to prevent this issue, only skip the GC if it was already
triggered during the same jiffy and the increment is lower than the
clean up limit. In addition, increase the clean up limit to 64
connections to avoid triggering GC too often and do more effective GCs.
This has been tested using a HTTP server and several
performance tools while having nft_connlimit/xt_connlimit or OVS limit
configured.
Output of slowhttptest + OVS limit at 52000 connections:
slow HTTP test status on 340th second:
initializing: 0
pending: 432
connected: 51998
error: 0
closed: 0
service available: YES |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Limit bpf program signature size
Practical BPF signatures are significantly smaller than
KMALLOC_MAX_CACHE_SIZE
Allowing larger sizes opens the door for abuse by passing excessive
size values and forcing the kernel into expensive allocation paths (via
kmalloc_large or vmalloc). |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: ns: Limit the maximum number of lookups
Current code does no bound checking on the number of lookups a client can
perform. Though the code restricts the lookups to local clients, there is
still a possibility of a malicious local client sending a flood of
NEW_LOOKUP messages over the same socket.
Fix this issue by limiting the maximum number of lookups to 64 globally.
Since the nameserver allows only atmost one local observer, this global
lookup count will ensure that the lookups stay within the limit.
Note that, limit of 64 is chosen based on the current platform
requirements. If requirement changes in the future, this limit can be
increased. |
| Volcano is a Kubernetes-native batch scheduling system. Prior to v1.14.2, v1.13.3, and v1.12.4, the Volcano webhook server does not enforce a size limit on incoming HTTP request bodies. Any in-cluster pod that can reach the webhook endpoint may send an arbitrarily large request body, potentially causing the webhook server to be killed by OOM. All Volcano deployments with the webhook server exposed to in-cluster traffic are affected. This vulnerability is fixed in v1.14.2, v1.13.3, and v1.12.4. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 17.1 before 18.10.7, 18.11 before 18.11.4, and 19.0 before 19.0.1 that under certain conditions could have allowed an authenticated user to cause denial of service due to insufficient validation. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: ns: Limit the total number of nodes
Currently, the nameserver doesn't limit the number of nodes it handles.
This can be an attack vector if a malicious client starts registering
random nodes, leading to memory exhaustion.
Hence, limit the maximum number of nodes to 64. Note that, limit of 64 is
chosen based on the current platform requirements. If requirement changes
in the future, this limit can be increased. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: split transactions in dio completion to avoid credit exhaustion
During ocfs2 dio operations, JBD2 may report warnings via following
call trace:
ocfs2_dio_end_io_write
ocfs2_mark_extent_written
ocfs2_change_extent_flag
ocfs2_split_extent
ocfs2_try_to_merge_extent
ocfs2_extend_rotate_transaction
ocfs2_extend_trans
jbd2__journal_restart
start_this_handle
output: JBD2: kworker/6:2 wants too many credits credits:5450 rsv_credits:0 max:5449
To prevent exceeding the credits limit, modify ocfs2_dio_end_io_write() to
handle extents in a batch of transaction.
Additionally, relocate ocfs2_del_inode_from_orphan(). The orphan inode
should only be removed from the orphan list after the extent tree update
is complete. This ensures that if a crash occurs in the middle of extent
tree updates, we won't leave stale blocks beyond EOF.
This patch also changes the logic for updating the inode size and removing
orphan, making it similar to ext4_dio_write_end_io(). Both operations are
performed only when everything looks good.
Finally, thanks to Jans and Joseph for providing the bug fix prototype and
suggestions. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: prevent infinite loops caused by the next valid being the same
When processing valid within the range [valid : pos), if valid cannot
be retrieved correctly, for example, if the retrieved valid value is
always the same, this can trigger a potential infinite loop, similar
to the hung problem reported by syzbot [1].
Adding a check for the valid value within the loop body, and terminating
the loop and returning -EINVAL if the value is the same as the current
value, can prevent this.
[1]
INFO: task syz.4.21:6056 blocked for more than 143 seconds.
Call Trace:
rwbase_write_lock+0x14f/0x750 kernel/locking/rwbase_rt.c:244
inode_lock include/linux/fs.h:1027 [inline]
ntfs_file_write_iter+0xe6/0x870 fs/ntfs3/file.c:1284 |
| IBM WebSphere Application Server - Liberty 19.0.0.7 through 26.0.0.5 and IBM WebSphere Application Server 9.0, and 8.5 and WebSphere Application Server Liberty are vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. |
